Pete: If using the OpenIB device support kit doesn't work, you may also need to update your Firmware boot loader (which I think is likely the case). The tool to do this is part of the AMSO1100 Release 1.2 Update 1 kit also on our web-site.
On Sat, 2006-03-18 at 09:03 -0600, Tom Tucker wrote: > The firmware on the adapter is down level. Sorry, the message needs to > just say that. "Invalid PCI regs magic" isn't particularly descriptive. > There's a new firmware load mechanism that we have been using. You can > download this mechanism from our website at > http://www.opengridcomputing.com/downloads.html. Select Ammasso 1100 > OPENIB Device Support Kit. > > On Fri, 2006-03-17 at 16:27 -0500, Pete Wyckoff wrote: > > I'm trying to get your iwarp branch working with our Ammasso NICs. > > Starting from a stock linux-2.6.16-rc6-git9 and with svn rev 5878, I > > replaced two kernel dirs with links into svn: > > > > <linux>/include/rdma -> > > <svn>/gen2/branches/iwarp/src/linux-kernel/infiniband/include/rdma > > <linux>/drivers/infiniband -> > > <svn>/gen2/branches/iwarp/src/linux-kernel/infiniband > > > > and a little patch in net/ipv4/fib_frontend.c to re-export > > ip_dev_find(). CONFIG_INFINIBAND_AMSO1100_DEBUG is on. > > > > The iw_c2 module isn't happy about the state of the NIC. It says > > via dmesg (on three different identical machines): > > > > c2: AMSO1100 Gigabit Ethernet driver v1.1 loaded > > ACPI: PCI Interrupt 0000:09:08.0[A] -> GSI 24 (level, low) -> IRQ 209 > > c2: BAR0 size = 0x4000 bytes > > c2: BAR2 size = 0x200000 bytes > > c2: BAR4 size = 0x20000000 bytes > > c2: Invalid PCI regs magic [1/7: got 0x42, exp 0x43] > > c2: Adapter not claimed > > ACPI: PCI interrupt for device 0000:09:08.0 disabled > > c2: probe of 0000:09:08.0 failed with error -5 > > > > I made it print out the magic regs: BOOTLDR rather than CEPHEUS. > > > > lspci says: > > > > am28# lspci -v -xxxx -s 09:08.0 > > 09:08.0 Co-processor: Ammasso AMSO 1100 iWARP/RDMA Gigabit Ethernet > > Coprocessor (rev 01) > > Subsystem: Ammasso AMSO 1100 iWARP/RDMA Gigabit Ethernet Coprocessor > > Flags: slow devsel, IRQ 209 > > Memory at b2600000 (64-bit, prefetchable) [size=16K] > > Memory at b2800000 (64-bit, prefetchable) [size=2M] > > Memory at c0000000 (64-bit, prefetchable) [size=512M] > > [virtual] Expansion ROM at b2610000 [disabled] [size=64K] > > Capabilities: [40] Power Management version 2 > > Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 > > Enable- > > Capabilities: [58] PCI-X non-bridge device. > > 00: b8 18 01 b0 13 01 10 04 01 00 40 0b 10 40 00 00 > > 10: 0c 00 60 b2 00 00 00 00 0c 00 80 b2 00 00 00 00 > > 20: 0c 00 00 c0 00 00 00 00 00 00 00 00 b8 18 01 b0 > > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00 > > 40: 01 48 0a 48 00 00 00 00 05 58 80 00 00 00 00 00 > > 50: 00 00 00 00 00 00 00 00 07 00 02 00 40 09 03 00 > > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > > This box is a > > > > Linux am28 2.6.16-rc6-git9 #2 SMP Fri Mar 17 15:46:39 EST 2006 x86_64 > > x86_64 x86_64 GNU/Linux > > fc4 updated > > Tyan S2891 mobo 2-cpu > > > > Any idea what's wrong here? Thanks, > > > > -- Pete > > _______________________________________________ > openib-general mailing list > [email protected] > http://openib.org/mailman/listinfo/openib-general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
