On Mon, Mar 20, 2006 at 04:12:44PM -0800, Roland Dreier wrote: > Leonid> the patch fixes a problem with the network interface > Leonid> "RUNNING" status. The problem was that the status stayed > Leonid> "RUNNING" with the cable disconnected, > > Hmm, is this really a bug? For example, on my laptop with an e1000 > wired interface with no cable plugged, the interface is still shown as > RUNNING.
In linux it depends on the driver and chipset if this is supported.. Alot of the drivers are using the generic MII stuff which supports carrier detection. In my experience all the common drivers now support it. It is important because the IPv6 stuff has recently started using running transitions as triggers to do dad and radv actions: eth0: link down eth0: link up, 10Mbps, half-duplex, lpa 0x0000 ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Good dhcp clients should also trigger actions on running changes. e1000 seems to call netif_carrier_on/off at reasonable points so at least the driver is trying to detect carrier ;> Since the main use of carrier detect is currently things like IPv6, it should follow the logical state of the ipoib device - ie the port is active, the mcast group is ready, etc. That way no radv or dad packets are sent into oblivion. Jason _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
