Albert, Thanks for sending the information. We'll have to take a look at it and get back to you.
Thanks, Matthew Koop > Thanks for helping out on this issue. As requested, the info is > attached. > > Note: The info was obtained from compilations of v0.9.2 and v0.9.3 > back-to-back. Thus, system and setup are exactly the same. Afterwards, > mpdboot works on v0.9.2 but NOT v0.9.3 > -----Original Message----- > From: Matthew Koop [mailto:[EMAIL PROTECTED] > Sent: Monday, May 01, 2006 6:56 PM > To: Albert To > Cc: wei huang; [email protected] > Subject: RE: [openib-general] Problem running mpdboot command in > MVAPICH2 v0.9.3-RC0 > > Albert, > > Has anything changed with your system since compiling MVAPICH2? I'm a > bit confused why it would have worked with 0.9.2 and not 0.9.3-RC0. > There wasn't any change between 0.9.2 and 0.9.3-RC0 that should create > this type of issue. > > Can you try re-compiling and re-running? If you could also send along > the configure.log generated it may help us look into this issue. Also, > can you just send the output from ls -l /usr/local/lib, just to make > sure there isn't any problems there? > > Thanks, > > Matthew Koop > > - > Network-Based Computing Laboratory > Ohio State University > > > > > Hi Wei, > > > > Thanks for a prompt reply. > > > > Yes, I did originally export the LD_LIBRARY_PATH in .bashrc as > followed: > > export LD_LIBRARY_PATH=/usr/local/lib > > > > I've also tried your suggestion: > > export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH > > > > In either case, issue still exists. Given the same setup, I did NOT > > see this issue in v0.9.2 (obtained from > > https://openib.org/svn/gen2/trunk/src/userspace/mpi/mvapich2-gen2). > > > > Thanks, > > Albert > > > > ----Original Message----- > > From: wei huang [mailto:[EMAIL PROTECTED] > > Sent: Saturday, April 29, 2006 2:09 PM > > To: Albert To > > Cc: [email protected] > > Subject: Re: [openib-general] Problem running mpdboot command in > > MVAPICH2 v0.9.3-RC0 > > > > Hi Albert, > > > > Not sure if you export /usr/local/lib to LD_LIBRARY_PATH manually or > > it is in your bashrc. > > > > Could you please try to put > > export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH > > > > in your .bashrc (assume using bash) and try again? > > > > Thanks. > > > > Regards, > > Wei Huang > > > > 774 Dreese Lab, 2015 Neil Ave, > > Dept. of Computer Science and Engineering Ohio State University OH > > 43210 > > Tel: (614)292-8501 > > > > > > On Fri, 28 Apr 2006, Albert To wrote: > > > > > Hi, > > > > > > I downloaded and compiled the MVAPICH2 v0.9.3-RC0 using > > > make.mvapich2.gen2 script. The script finished without any errors. > > > However, I received "mpdboot: error while loading shared libraries: > > > libibverbs.so.1: cannot open shared object file: No such file or > > > directory" error while executing mpdboot -n 2 -f mpd.hosts. I > > > checked > > > > > library file libibverbs.so.1 and found it in /usr/local/lib folder. > > > LD_LIBRARY_PATH is already set to /usr/local/bin, but that didn't > > help. > > > > > > Is there another environment variable that I need to set to make > > > mpdboot works? Thanks in advance for your help. > > > > > > -Albert > > > > > > > > > > > _______________________________________________ > > openib-general mailing list > > [email protected] > > http://openib.org/mailman/listinfo/openib-general > > > > To unsubscribe, please visit > > http://openib.org/mailman/listinfo/openib-general > > > > > _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
