Quoting r. [EMAIL PROTECTED] <[EMAIL PROTECTED]>: > Subject: Re: NOP problem in ib_mthca on OFED RC4 > > > Michael, > > > > > Which FW revision do you have? > > > > > > > The "ibstat" command shows: > > > > > > CA type: MT25204 > > > Number of ports: 1 > > > Firmware version: 1.0.800 > > > Hardware version: a0 > > > Node GUID: 0x0002c90200216dc4 > > > System image GUID: 0x0002c90200216dc7 > > > > > > -Don Albert- > > > > > > > Yes, that's the latest revision. Hmm. > > > > What about the other thing I mentioned in my first message: the "lspci" > command complains about the board slot that the HCA is plugged into: > > pcilib: Resource 2 in /sys/bus/pci/devices/0000:03:00.0/resource has a > 64-bit address, ignoring > .... > 03:00.0 InfiniBand: Mellanox Technologies MT25204 [InfiniHost III Lx HCA] > (rev 20) > > I also found out that on this machine the HCA is plugged into a 16X PCI-e > slot, which is different than the other machine which is working, where the > slot is 8X. > > Bear in mind, however, that both machines were previously working with the > 2.6.9-34 kernel with the backport patches and the OpenIB svn 6500 code. Did > something happen in 2.6.16, or am I missing a patch? > > -Don Albert- >
Could you please give more detail on the exact system that had/has this problem? Model, chipset revision, full lspci -v output, etc. Also, is there some way to login to such a system there remotely? Thanks a bunch, -- MST _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
