Why don't you mirror the ethernet ports in question on your switch and run tcpdump to capture the packets? That would give us a clue as to how far the connection setup is getting...
NOTE: You cannot use tcpdump on the iw interface and expect to see the packets. You need to run it on a 3rd system... Steve. On Fri, 2006-07-14 at 22:08 -0500, Steve Wise wrote: > ----- Original Message ----- > From: "Ravinandan Arakali" <[EMAIL PROTECTED]> > To: "'Steve Wise'" <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]>; <[email protected]>; "Leonid. Grossman > (E-mail)" <[EMAIL PROTECTED]> > Sent: Friday, July 14, 2006 5:36 PM > Subject: RE: [openib-general] ping problem with > ammassocards(iWARPinterface) > > > > As Pradipta suggested, I rebuilt the libraries by removing > > the optimization(-O2 flag) from Makefile. Now, I don't see the > > core dump but there's no connection established with rping. > > This is similar to the failure I am seeing with rdma_lat test. > > > > BTW, when I start the rping in server mode, at say port 9999, > > should I expect to see an entity listening on that port number > > when I do "netstat -an". Currently, I don't see that. > > > > No, netstat doesn't show rdma information.... > > > > > _______________________________________________ > openib-general mailing list > [email protected] > http://openib.org/mailman/listinfo/openib-general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general > _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
