With disabling of MSI-X rping now works. Thanks, --Sundeep.
On Tue, 25 Jul 2006, Sundeep Narravula wrote: > Hi Steve, > > > 1) krping works over T3. So the physical connectivity is ok. > > This does NOT work. It gives out the same error as rping. > > > 2) rping doesn't work...rping client gets an error 110 from cma event 1. > > Event 1 is ADDR_ERROR, which means something balled up trying to figure > > out which local interface to use, or the ARP resolution failed (timed > > out). > > > > 3) I seem to remember from the T3 debug logs, that the client isn't > > getting any connect request from the iwarp CM. This jives with #2. > > Yes and Yes. > > > > > Does the server ever get any connection indication at all? > > No. The server logs do not show any indication of conenction request or > error > > > Can I log into these systems and poke around? It'll definitely expedite > > things... > > Yes. We will create an account on these systems. I will send out the > information shortly. > > > Also, a network sniffer trace of pkts going in/out of the client's port > > would help too... > > I will have to check this. > > Thanks, > --Sundeep. > > > > > Steve. > > > > > > > > > > On Tue, 2006-07-25 at 13:47 -0400, Sundeep Narravula wrote: > > > > > > > > > > > > > We are using kernel 2.6.16.3 and installed the latest > > > > > > > > > > > > > code/drivers from > > > > > > > > > > > > > the iwarp branch. Currently, we are seeing an address > > > > > > > > > > > > > resolution problem > > > > > > > > > > > > > while using rping. > > > > > > > > > > > > > > > > > > > > > > > > > > [EMAIL PROTECTED] examples]$ ./rping -c -VvC100 -a > > > > > > > > > > > > > 150.10.11.200 -p 9999 > > > > > > > > > > > > > libibverbs: Warning: couldn't load driver > > > > > > > > > > > > > /usr/local/lib/infiniband/mthca.so: > > > > > > > > > > > > > /usr/local/lib/infiniband/mthca.so: > > > > > > > > > > > > > undefined symbol: ibv_cmd_query_pkey > > > > > > > > > > > > > cma event 1, error -110 > > > > > > > > > > > > > > > > Why don't you go ahead and build/install libmthca -or- remove the IB > > > > card and see if that helps. This is still some basic > > > > configuration/installation problem here... > > > > > > Hi Steve, > > > We have tried both these options. Building libmthca / removing the IB > > > cards did not help. We are still running the same errors. The dmesg log > > > are also identical. > > > > > > --Sundeep. > > > > > > > > > > > Steve. > > > > > > > > > > > > > _______________________________________________ > openib-general mailing list > [email protected] > http://openib.org/mailman/listinfo/openib-general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general > _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
