On Mon, 2006-08-14 at 07:36, Dotan Barak wrote: > Hi. > > I noticed that the behavior of the openSM was changed in the latest driver: > > in the past, every HCA was configured (by the FW) with 0xffff in the first > entry. > today,
Just as an FYI: I think that Anafas have this in the second entry on port 0. -- Hal > the PKey table is being configured by the openSM: the first entry > is being set to 0x7fff (except for the host that the SM is being executed > from) > > This behavior is very problemtic because not all of the users would like > to change the default PKey table (for example: MPI users). > Users that will try to use OFED 1.1 (in the same way they used OFED 1.0) will > get unexplained failures, because the connectivity because the nodes will be > broken. > (even the perfquery started to fail after executing the SM) > > > I think that the default behavior of the openSM should be: not to change the > PKey table, unless the user provided a PKey table policy file. > > Here are the props of the machines > > ************************************************************* > Host Architecture : x86_64 > Linux Distribution: Red Hat Enterprise Linux AS release 4 (Nahant Update 3) > Kernel Version : 2.6.9-34.ELsmp > GCC Version : gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2) > Memory size : 4039892 kB > Driver Version : gen2_linux-20060813-1905 (REV=8916) > HCA ID(s) : mthca0 > HCA model(s) : 23108 > FW version(s) : 3.4.927 > Board(s) : MT_0030000001 > ************************************************************* > > > thanks > Dotan _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
