Hi, OFED installation script check that the directory /lib/modules/`uname -r`/build/ and the file /lib/modules/`uname -r`/build/Makefle exist. It does not check for kernel-source RPM because of kernels from kernel.org support.
-- Regards, Vladimir On Tue, 2006-10-17 at 15:45 -0700, Scott Weitzenkamp (sweitzen) wrote: > You need the kernel-source RPM, I guess the OFED install.sh should check > for that RPM. > > svbu-qa-opteron-1:~ # uname -a > Linux svbu-qa-opteron-1 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC > 2006 i68 > 6 athlon i386 GNU/Linux > svbu-qa-opteron-1:~ # rpm -qa | fgrep kernel > kernel-source-2.6.16.21-0.8 > kernel-smp-2.6.16.21-0.8 > kernel-ib-1.1-2.6.16.21_0.8_smp > kernel-ib-devel-1.1-2.6.16.21_0.8_smp > svbu-qa-opteron-1:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp > .config Makefile arch include2 > .kernelrelease Module.symvers include scripts > > Scott Weitzenkamp > SQA and Release Manager > Server Virtualization Business Unit > Cisco Systems > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Chris Dennett > > Sent: Tuesday, October 17, 2006 12:46 PM > > To: [EMAIL PROTECTED]; [email protected] > > Subject: [openib-general] OFED 1.1-RC7 build problem on SLES10 > > > > I've been trying to install OFED 1.1 RC7 on an x86 server > > with a fresh install > > of SLES10 (32-bit). It errors out when trying to build the > > kernel modules. > > I've included what I think are the relevant log messages > > below. I've tried > > installing everything (minus iser and tvflash) or just the > > modules needed for > > SRP. I've installed 1.1 RC7 successfully on other RedHat > > servers without any > > problems. I am installing as root. Any help would be appreciated. > > > > Thanks. > > > > -Chris > > > > ============================================== > > + make kernel > > Building kernel modules > > Kernel version: 2.6.16.21-0.8-smp > > Modules directory: //lib/modules/2.6.16.21-0.8-smp > > Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build > > env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \ > > > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \ > > > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \ > > make -C /lib/modules/2.6.16.21-0.8-smp/build > > SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband" > > KERNELRELEASE=2.6.16.21-0.8-smp \ > > EXTRAVERSION=.21-0.8-smp V=1 \ > > CONFIG_INFINIBAND=m \ > > CONFIG_INFINIBAND_IPOIB=m \ > > CONFIG_INFINIBAND_SDP= \ > > CONFIG_INFINIBAND_SRP=m \ > > CONFIG_INFINIBAND_USER_MAD=m \ > > CONFIG_INFINIBAND_USER_ACCESS=m \ > > CONFIG_INFINIBAND_ADDR_TRANS=y \ > > CONFIG_INFINIBAND_MTHCA=m \ > > CONFIG_INFINIBAND_IPOIB_DEBUG=y \ > > CONFIG_INFINIBAND_ISER= \ > > CONFIG_INFINIBAND_EHCA= \ > > CONFIG_INFINIBAND_RDS= \ > > CONFIG_INFINIBAND_RDS_DEBUG= \ > > CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \ > > CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \ > > CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \ > > CONFIG_INFINIBAND_SDP_DEBUG= \ > > CONFIG_INFINIBAND_SDP_DEBUG_DATA= \ > > CONFIG_INFINIBAND_IPATH= \ > > CONFIG_INFINIBAND_MTHCA_DEBUG=y \ > > CONFIG_INFINIBAND_MADEYE= \ > > LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \ > > > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \ > > -Iinclude \ > > $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ > > -include include/linux/autoconf.h \ > > -include > > /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \ > > ' \ > > modules > > make[1]: Entering directory > > `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp' > > make[1]: *** No rule to make target `modules'. Stop. > > make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp' > > make: *** [kernel] Error 2 > > error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install) > > > > > > RPM build errors: > > user vlad does not exist - using root > > group mtl does not exist - using root > > user vlad does not exist - using root > > group mtl does not exist - using root > > Bad exit status from /var/tmp/rpm-tmp.92052 (%install) > > ERROR: Failed executing "rpmbuild --rebuild --define '_topdir > > /var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define > > 'build_root > > /var/tmp/OFED' --define 'configure_options --with-libibcommon > > --with-libibmad > > --with-libibumad --with-libibverbs --with-libmthca --with-opensm > > --with-librdmacm --with-openib-diags --with-srptools --with-mstflint > > --with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod > > --with-core-mod --with-user_mad-mod --with-user_access-mod > > --with-addr_trans-mod' --define 'configure_options32 %{nil}' --define > > 'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC > > /lib/modules/2.6.16.21-0.8-smp/build' --define > > 'build_kernel_ib 1' --define > > 'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR > > /etc/sysconfig/network' > > --define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define > > 'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm" > > > > =================================================== > > > > smx32:~ # uname -a > > Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 > > UTC 2006 i686 > > i686 i386 GNU/Linux > > smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp > > Module.symvers > > > > > > > > -- > > Chris Dennett > > Design Engineer > > Texas Memory Systems, Inc. > > 713-266-3200 x430 > > [EMAIL PROTECTED] > > > > > > _______________________________________________ > > openib-general mailing list > > [email protected] > > http://openib.org/mailman/listinfo/openib-general > > > > To unsubscribe, please visit > > http://openib.org/mailman/listinfo/openib-general > > > > _______________________________________________ > openfabrics-ewg mailing list > [EMAIL PROTECTED] > http://openib.org/mailman/listinfo/openfabrics-ewg _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
