Vladimir Sokolovsky wrote: > Hi Shaun, > Please check the following issue:
Hi Vladimir. I can tell from the output what seems to have happened, but I don't know why it happened. When I tested using the install/build scripts you had given us originally, I tested against OFED 1.1 files to understand how the build procedure worked. From that testing, the first thing I found that I had to deal with was the fact that the openib packages were built in /var/tmp/OFED and left there for other packages to be built against. Since the openib files are in a location other than their final destination, I created the %ofed_build_root macro to define this location and in addition, set a %ofed_bootstarp condition in the RPM. From the rpmbuild command below, this appears to be called how I expect. However: > Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.84872 > + umask 022 > + cd /var/tmp/OFEDRPM/BUILD > + cd mvapich2-0.9.8 > + export OPEN_IB_HOME=/var/tmp/OFED/usr/local/ofed > + OPEN_IB_HOME=/var/tmp/OFED/usr/local/ofed > + '[' -d /var/tmp/OFED/usr/local/ofed/lib ']' > + '[' -d /var/tmp/OFED/usr/local/ofed/lib64 ']' In the two lines above, I am setting LD_LIBRARY_PATH so that MVAPICH2 can be built. I do this because, again, the files are not in their final destination directory, but in /var/tmp/OFED/$STACK_PREFIX/lib[64]. Above, I am testing for either the lib or lib64 directory in that path, but neither is being found because there is no associated export of LD_LIBRARY_PATH above. This is also why: > + export PREFIX=/var/tmp/OFED/usr/local/ofed/mpi/gcc/mvapich2-0.9.8-1 > + PREFIX=/var/tmp/OFED/usr/local/ofed/mpi/gcc/mvapich2-0.9.8-1 > + export CC=gcc CXX=g++ F77=gfortran > + CC=gcc > + CXX=g++ > + F77=gfortran > + export ROMIO=yes > + ROMIO=yes > + export SHARED_LIBS=yes > + SHARED_LIBS=yes > + ./make.mvapich2.gen2 > Could not find the OPEN_IB_HOME/lib64 or OPEN_IB_HOME/lib directory. > Exiting. > error: Bad exit status from /var/tmp/rpm-tmp.84872 (%install) our make.mvapich2.gen2 script fails. It actually exists if either of these directories cannot be found. It is basically the same check, except in make.mvapich2.gen2 LD_LIBRARY_PATH is not set, and it also exists if the directories are not found. It would be possible to do the LD_LIBRARY_PATH setting in make.mvapich2.gen2 as well, but usually it isn't necessary - so I had added the code to the spec file myself. So my question in this case, given the error output, is what happened to /var/tmp/OFED/usr/local/ofed/lib or /var/tmp/OFED/usr/local/ofed/lib64? The rpmbuild is not finding those directories, but the files should still be there for MVAPICH2 to be built against, yes? Unless the build process has changed, it seems these directories do not exist when I was expecting them to exist. They should be there at that location, right? I've not tried the new install/build scripts since you've updated them. I think I need to make an openib SRPM for this or ? I am currently investigating this and will attempt to use the new scripts on my own testing system. I will also check if there are any files I can use instead of making an SRPM if that's even necessary (it seems that it was, so I had not done it yet). -- Shaun Rowland [EMAIL PROTECTED] http://www.cse.ohio-state.edu/~rowland/ _______________________________________________ openib-general mailing list openib-general@openib.org http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
