I've been using smartmontools 5.40 for a while with few issues. I have 9 drives between two SATA controllers and use the following line in smartd.conf to run the self tests:
/dev/rdsk/c1t0d0 -d sat,12 -o on -S on -t -I 194 -I 231 -I 9 -l error -l selftest -s (S/../.././02|L/../../4/04) -m slefe...@example.com This line is repeated once for each drive. To get the temperature for a drive, a simple one-liner works: smartctl -A -d sat,12 /dev/rdsk/c1t0d0 | grep ^194 | awk '{print $10}' Cheers, Scott LeFevre On Tue, 2012-05-22 at 14:31 +0400, Jim Klimov wrote: > 2012-05-22 13:05, an...@ak47.co.za wrote: > > smartctl /dev/rdsk/c10d1 > > smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build) > > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > > It might also matter that you have an older version of the tools. > The one I fetched recently from SourceForge and compiled was 5.42: > > smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.11] (local build) > Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net > > But still not everything works for me, i.e. I can't initiate > SMART self-tests (scrubs of disk media by disk itself) on a > particular box. > > HTH, > //Jim Klimov > > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss