I had things configured originally via ifconfig and then unplumbed the
interface and recreated it using ipadm but after a reboot, things went
weird on me. I figure that it's some remnant left over from my original
manual configuration after disabling nwam years ago.
I created two persistent interfaces using ipadm:
bge0/v4
bge0/v6
what I ended up after reboot was:
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
lo0/_a static ok 127.0.0.2/32
bge0/? dhcp ok 98.221.143.25/21
lo0/v6 static ok ::1/128
bge0/v4 dhcp disabled ?
bge0/v6 addrconf disabled ::
Why did it create bge0/? and why are the persistent addresses I created
disabled? Also, ipadm delete-addr bge0/v6 says that the object doesn't
exist if that helps.
I've resorted to removing them manually from ipadm.conf, unplumbing the
bge0 interface and then recreated them using ipadm again and I'm back to
where I should be:
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 0.0.0.6/8
lo0/_a static ok 127.0.0.2/32
bge0/v4 dhcp ok 98.221.143.25/21
lo0/v6 static ok ::1/128
bge0/v6 addrconf ok fe80::209:3dff:fe13:3a3/10
bge0/v6 addrconf ok 2001:558:6026:8c:44f2:de61:c396:e2f8/128
Any advice would be appreciated.
Thanks,
Gary
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
