<signaturebeforequotedtext></signaturebeforequotedtext> On 25.10.18 23:03, Gary Mills <gary_mi...@fastmail.fm> wrote: > > On Thu, Oct 25, 2018 at 06:15:15PM +0000, Carsten John wrote: > > > > I'm struggeling to get serial over lan via IPMI on Supermicro > > mainboards running with hipster. > > > > As long as OI used grub I had a working setup. > > > > After moving to BootForth this does not work any more. > > > > The recipe at http://docs.openindiana.org/handbook/common-tasks/ > > does not work for me. > > I have a system with a Supermicro motherboard and another with a Tyan > motherboard. Both have a VGA device that converts text to serial, > with a separate ethernet port dedicated to this device. I use ipmitool > running on a third system to connect to these ethernet ports. Is that > similar to what you have? > > It shouldn't matter what operating system is running on the Supermicro > system, at least for BIOS output. Do you get that output? Once the OS > boots, it configures ttya and ttyb for I/O on the hardware serial ports. > Putting the console on ttyc might solve your problems. > <signatureafterquotedtext></signatureafterquotedtext> >
I use a Supermicro X10SLM-F which works with loader via SOL: BIOS: pre.western { font-family: "Courier New",monospace; }pre.cjk { font-family: "FZSongTi",monospace; }pre.ctl { font-family: "Courier New",monospace; }p { margin-bottom: 0.21cm; }a:link { }code.western { font-family: "Courier New",monospace; }code.cjk { font-family: "FZSongTi",monospace; }code.ctl { font-family: "Courier New",monospace; } Terminal Type [VT-UTF8]Bits per second [115200]Data Bits [8]Parity [None]Stop Bits [1]Flow Control [None]VT-UTF8 Combo Key Support [Enabled]Recorder Mode [Disabled]Resolution 100x31 [Enabled]Legacy OS Redirection Resolution [80x24]Putty KeyPad [VT100]Redirection After BIOS POST [Always Enable] $ eeprom keyboard-layout=Unknown ata-dma-enabled=1 atapi-cd-dma-enabled=1 ttyd-rts-dtr-off=false ttyd-ignore-cd=true ttyc-rts-dtr-off=false ttyc-ignore-cd=true ttyb-rts-dtr-off=false ttyb-ignore-cd=true ttya-rts-dtr-off=false ttya-ignore-cd=true ttyd-mode=9600,8,n,1,- ttyc-mode=9600,8,n,1,- ttyb-mode=115200,8,n,1,- ttya-mode=115200,8,n,1,- lba-access-ok=1 console=ttyb have no config in /boot/loader.d/ _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss