hi!
>From your screenshot, you do get 5 disks recognized (disk0 - disk4), that
>means, those are disks you can use for booting. It *may* be the limit is
>higher with UEFI boot.
You can check the number of disks while booting from usb/cd, press esc to get
out of boot menu, and enter: lsdev -v, loader will report only those disk
devices which BIOS can see, and only those devices can be used for booting.
Since you are writing to OI list (and not freebsd), there is another way to
check; in illumos you can get list of BIOS accessible disks with:
$ prtconf -v | grep biosdev
name='biosdev-0x83' type=byte items=588
name='biosdev-0x82' type=byte items=588
name='biosdev-0x81' type=byte items=588
name='biosdev-0x80' type=byte items=588
in this example, the system does have 4 BIOS-visible disk devices, and
incidentally those are all disks this system does have, and I have:
tsoome@beastie:/code$ zpool status
pool: rpool
state: ONLINE
scan: resilvered 1,68T in 0 days 10:10:07 with 0 errors on Fri Oct 25
05:05:34 2019
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c3t0d0 ONLINE 0 0 0
c3t1d0 ONLINE 0 0 0
c3t3d0 ONLINE 0 0 0
c3t4d0 ONLINE 0 0 0
errors: No known data errors
tsoome@beastie:/code$
Please note; in theory, if you have 5 visible disks, you could create boot pool
by having those 5 disks for data + parity disks, but such configuration would
not be advisable, because if one data disk will get an issue, then you can not
boot (unless you swap around physical disks).
Therefore, the suggestion would be to verify, how many disks your system BIOS
or UEFI can see, and plan the boot pool accordingly.
rgds,
toomas
> On 17. Feb 2021, at 11:26, Thebest videos <sri.chityala...@gmail.com> wrote:
>
> Hi there,
>
> I'm facing one issue since long time.i.e., I'm trying to create raidz
> configuration with multiple disks as below
> Create RAIDZ for 4 disks each vdev in RAIDZ1/RAIDZ2 intotal 2 vdevs
>
> I'm running below commands running for each hard disk
>
> gpart create -s gpt ada0
>
> gpart add -a 4k -s 512K -t freebsd-boot ada0
>
> gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ada0
>
> gpart add -a 1m -s 2G -t freebsd-swap -l swap0 ada0
>
> gpart add -a 1m -t freebsd-zfs -l disk0 ada0
>
>
> #RAIDZ creating
>
> zpool create -o altroot=/mnt datapool raidz2 ada0p3 ada1p3 ada2p3 ada3p3
> raidz2 ada4p3 ada5p3 ada6p3 ada7p3
>
> zfs create -o mountpoint=/ -o canmount=noauto datapool/boot
>
> mount -t zfs datapool/boot /mnt
>
> mount_cd9660 /dev/cd0 /media
>
> cp -r /media/* /mnt/.
>
> zpool set bootfs=datapool/boot datapool
>
>
> I've tried both RAIDZ1 and RAIDZ2 getting same issue has been attached
>
>
> 2 attachments has attached screenshot 1 (17th feb) issue: when i create
> with 2vdevs with 4 disks each vdev
>
> 2nd attachment (16th feb)issue : creating RAIDZ2 with 5 disks with each
> vdev total 2vdevs in total
>
>
> Kindly respond since i need to fix this issue anyway
> <Screenshot 2021-02-17 at 11.20.11 AM.png><Screenshot 2021-02-16 at 5.58.31
> PM.png>_______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss@openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
