> On 29. Aug 2021, at 14:31, Michelle <miche...@msknight.com> wrote: > > I'm sat here, not knowing quite what I'm dealing with. > > OI recent build on HP N54L, as you may remember I hit a problem on the > 8th August with rpool encountering an error on the SSD with the OS. > > I replaced the drive and had the same thing straight away. Replaced > with another drive and took the unit down to basics including a RAM > check and rebuilt it. It's been running until today... same thing. > > On the messages screen I see at just gone 00:00 this morning... > Sense Key: aborted command > Vendor Gen-ATA error code 0x3 > Rpool has encountered an uncorrectable IO failure and has been > suspended. Zpool clear will be required before the pool can be written > to > > The rpool message repeated at 00:05, 00:22, 02:54 and at 08:54 ...and > it's now stopped responding. > > So... I've now got no idea where to take this. On the face of it, the > hardware is fine... on the face of it. However, there's something wrong > here and given the history, I'm not sure where to start. > > Part of me thinks I'm looking at hardware... > > Power? Hmmm... why does the SSD fail instead of the spinning rust > drives? > > Yet another hard drive? This is number three now, throwing suspicion at > other aspects. > > I am reticent to just replace with another hard drive and carry on. I > think it may not be to blame here. > > Grateful for people's thoughts. > > Michelle. >
Apparently this can be multiple things… Does your system allow to set AHCI (SATA) mode from BIOS setup? This may help. also see https://docs.oracle.com/cd/E19253-01/820-7273/ggmsj/index.html <https://docs.oracle.com/cd/E19253-01/820-7273/ggmsj/index.html> In general, you really want to keep away from IDE… rgds, toomas _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss