Hi everyone, I was wondering if you would have some recommendations for setting up the crossbow configuration on a new server at university.
The machine has 3 networking interfaces: - one bge0 with an address 10.202.96.14/24 given by the university's dhcp server, that cannot be changed, I only have the right to get one IP, gateway is 10.202.96.254. - two 25Gb Mellanox interfaces configured as static addresses for serving file shares to two other machines. Until now I have used NWAM for the configuration by creating a specific NCP then I had created a virtual NIC named vnic0 for the zone, and another br0 used as gateway with dladm/ipadm then forwarding/routing rules from vnic0 -> br0 -> bge0 and masquerading from bg0 with a map in /etc/ipf/ipnat.conf. The virtual subnet was such that vnic0 got address 10.202.254.1 and br0 10.202.254.100 with the appropriate netmask (16 I think). However this setup breaks after the reboot because the NWAM configuration creates temporary "objects". Also I am not sure if this virtual nic serving as a gateway is necessary, or if an etherstub should be used. Do you have any pointer or recommendation for such a setup with a zone on a virtual private subnet? Kind regards, Aurélien -- --- Praise the Caffeine embeddings _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss