Hi.
I have a picmg 2.16 chassis with a few cards in it.
I need to query one card (lets call that target card) from another card
(lets call that host card).
I used ipmitool to get sensors and some more info on the host card, so I
know that it works to at least some extent.
I am getting errors when trying to query the target card.
I try the following: (ipmitool version 1.8.6 and 1.8.8 yield the same
results)
[EMAIL PROTECTED] yan_b]# ipmitool -vvvv -I open raw 0x20 0x00 0x1f
RAW REQ (channel=0x0 netfn=0x20 lun=0x0 cmd=0x0 data_len=1)
RAW REQUEST (1 bytes)
1f
Set IPMB address to 0x20
OpenIPMI Request Message (1 bytes)
1f
Sending request to System Interface
Unable to send RAW command (channel=0x0 netfn=0x20 lun=0x0 cmd=0x0
rsp=0xc1): Invalid command
What I am trying to do is send command 0x00 with data 0x1f to target
card at address 0x20 over i2c.
I'm not that much of an IPMI expert, and all I need is some simple
functionality, so I admit that I do not understand this stuff to its
fullest.
If someone could help me or at least guide me to the place where I can
get answers, I would really appreciate that.
Btw, I am using linux 2.6.18.5 with the latest v39.1 openIPMI patches on
i801 chip.
Regards
Yan Burman
MER Group
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Openipmi-developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openipmi-developer
