Hi, Corey Minyard wrote: > Great, thanks for the testing. I had just hacked this out quickly to > try it out, but thanks for the review, too. I've added a "Tested-by" > and "Reviewed-by" for you, if that's ok.
Yup, that's okay! Thank you for asking. > I'll get this into 4.0, if possible, and into the 3.19 stable kernel. Thanks! PS: That's the way I tested: As said, before applying your patch, I was getting flooded by "Could not set the global enables: 0xcc." messages when I loaded the ipmi_si module. This is gone with the patch. And the interface seems to work. Verified using ipmitool-1.8.15: I started ipmievd (/usr/sbin/ipmievd -I open sel pidfile=/run/ipmievd.pid) and triggered a test event (ipmitool event 3) which will appear in my syslog like expected (Apr 4 21:09:16 testbox42 ipmievd: Memory sensor - Correctable ECC (@DIMMX6(CPU4))). PS2: I am going to report this upstream (Supermicro) because you said this should be fixed in the IPMI firmware as well. Again, thanks for your support and work! -Thomas ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Openipmi-developer mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openipmi-developer
