From: Corey Minyard <cminy...@mvista.com>
When excuting a command like:
modprobe ipmi_si ports=0xffc0e3 type=bt
The system would get an oops.
The trouble here is that ipmi_si_hardcode_find_bmc() is called before
ipmi_si_platform_init(), but initialization of the hard-coded device
creates an IPMI platform device, which won't be initialized yet.
The real trouble is that hard-coded devices aren't created with
any device, and the fixup is done later. So do it right, create the
hard-coded devices as normal platform devices.
This required adding some new resource types to the IPMI platform
code for passing information required by the hard-coded device
and adding some code to remove the hard-coded platform devices
on module removal.
To enforce the "hard-coded devices passed by the user take priority
over firmware devices" rule, some special code was added to check
and see if a hard-coded device already exists.
Reported-by: Yang Yingliang <yangyingli...@huawei.com>
Signed-off-by: Corey Minyard <cminy...@mvista.com>
---
I believe this is the right fix. Can you test/review and send the
results?
Thanks,
-corey
drivers/char/ipmi/ipmi_si.h | 4 +-
drivers/char/ipmi/ipmi_si_hardcode.c | 236 ++++++++++++++++++++-------
drivers/char/ipmi/ipmi_si_intf.c | 23 ++-
drivers/char/ipmi/ipmi_si_platform.c | 25 ++-
4 files changed, 214 insertions(+), 74 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_si.h b/drivers/char/ipmi/ipmi_si.h
index 52f6152d1fcb..7ae52c17618e 100644
--- a/drivers/char/ipmi/ipmi_si.h
+++ b/drivers/char/ipmi/ipmi_si.h
@@ -25,7 +25,9 @@ void ipmi_irq_finish_setup(struct si_sm_io *io);
int ipmi_si_remove_by_dev(struct device *dev);
void ipmi_si_remove_by_data(int addr_space, enum si_type si_type,
unsigned long addr);
-int ipmi_si_hardcode_find_bmc(void);
+void ipmi_hardcode_init(void);
+void ipmi_si_hardcode_exit(void);
+int ipmi_si_hardcode_match(int addr_type, unsigned long addr);
void ipmi_si_platform_init(void);
void ipmi_si_platform_shutdown(void);
diff --git a/drivers/char/ipmi/ipmi_si_hardcode.c b/drivers/char/ipmi/ipmi_si_hardcode.c
index 487642809c58..1e5783961b0d 100644
--- a/drivers/char/ipmi/ipmi_si_hardcode.c
+++ b/drivers/char/ipmi/ipmi_si_hardcode.c
@@ -3,6 +3,7 @@
#define pr_fmt(fmt) "ipmi_hardcode: " fmt
#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
#include "ipmi_si.h"
/*
@@ -12,23 +13,22 @@
#define SI_MAX_PARMS 4
-static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
-static char si_type_str[MAX_SI_TYPE_STR];
+static char si_type_str[MAX_SI_TYPE_STR] __initdata;
static unsigned long addrs[SI_MAX_PARMS];
static unsigned int num_addrs;
static unsigned int ports[SI_MAX_PARMS];
static unsigned int num_ports;
-static int irqs[SI_MAX_PARMS];
-static unsigned int num_irqs;
-static int regspacings[SI_MAX_PARMS];
-static unsigned int num_regspacings;
-static int regsizes[SI_MAX_PARMS];
-static unsigned int num_regsizes;
-static int regshifts[SI_MAX_PARMS];
-static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
-static unsigned int num_slave_addrs;
+static int irqs[SI_MAX_PARMS] __initdata;
+static unsigned int num_irqs __initdata;
+static int regspacings[SI_MAX_PARMS] __initdata;
+static unsigned int num_regspacings __initdata;
+static int regsizes[SI_MAX_PARMS] __initdata;
+static unsigned int num_regsizes __initdata;
+static int regshifts[SI_MAX_PARMS] __initdata;
+static unsigned int num_regshifts __initdata;
+static int slave_addrs[SI_MAX_PARMS] __initdata;
+static unsigned int num_slave_addrs __initdata;
module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
MODULE_PARM_DESC(type, "Defines the type of each interface, each"
@@ -73,12 +73,133 @@ MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave
address for"
" overridden by this parm. This is an array indexed"
" by interface number.");
-int ipmi_si_hardcode_find_bmc(void)
+static struct platform_device *ipmi_hc_pdevs[SI_MAX_PARMS];
+
+static void __init ipmi_hardcode_init_one(const char *si_type_str,
+ unsigned int i,
+ unsigned long addr,
+ unsigned int flags)
{
- int ret = -ENODEV;
- int i;
- struct si_sm_io io;
+ struct platform_device *pdev;
+ unsigned int num_r = 1, size;
+ struct resource r[4];
+ struct property_entry p[6];
+ enum si_type si_type;
+ unsigned int regspacing, regsize;
+ int rv;
+
+ memset(p, 0, sizeof(p));
+ memset(r, 0, sizeof(r));
+
+ if (!si_type_str || !*si_type_str || strcmp(si_type_str, "kcs") == 0) {
+ size = 2;
+ si_type = SI_KCS;
+ } else if (strcmp(si_type_str, "smic") == 0) {
+ size = 2;
+ si_type = SI_SMIC;
+ } else if (strcmp(si_type_str, "bt") == 0) {
+ size = 3;
+ si_type = SI_BT;
+ } else if (strcmp(si_type_str, "invalid") == 0) {
+ /*
+ * Allow a firmware-specified interface to be
+ * disabled.
+ */
+ size = 1;
+ si_type = SI_TYPE_INVALID;
+ } else {
+ pr_warn("Interface type specified for interface %d, was invalid:
%s\n",
+ i, si_type_str);
+ return;
+ }
+
+ regsize = regsizes[i];
+ if (regsize == 0)
+ regsize = DEFAULT_REGSIZE;
+
+ p[0] = PROPERTY_ENTRY_U8("ipmi-type", si_type);
+ p[1] = PROPERTY_ENTRY_U8("slave-addr", slave_addrs[i]);
+ p[2] = PROPERTY_ENTRY_U8("addr-source", SI_HARDCODED);
+ p[3] = PROPERTY_ENTRY_U8("reg-shift", regshifts[i]);
+ p[4] = PROPERTY_ENTRY_U8("reg-size", regsize);
+ /* Last entry must be left NULL to terminate it. */
+
+ /*
+ * Register spacing is derived from the resources in
+ * the IPMI platform code.
+ */
+ regspacing = regspacings[i];
+ if (regspacing == 0)
+ regspacing = regsize;
+
+ r[0].start = addr;
+ r[0].end = r[0].start + regsize - 1;
+ r[0].name = "IPMI Address 1";
+ r[0].flags = flags;
+
+ if (size > 1) {
+ r[1].start = r[0].start + regspacing;
+ r[1].end = r[1].start + regsize - 1;
+ r[1].name = "IPMI Address 2";
+ r[1].flags = flags;
+ num_r++;
+ }
+
+ if (size > 2) {
+ r[2].start = r[1].start + regspacing;
+ r[2].end = r[2].start + regsize - 1;
+ r[2].name = "IPMI Address 3";
+ r[2].flags = flags;
+ num_r++;
+ }
+
+ if (irqs[i]) {
+ r[num_r].start = irqs[i];
+ r[num_r].end = irqs[i];
+ r[num_r].name = "IPMI IRQ";
+ r[num_r].flags = IORESOURCE_IRQ;
+ num_r++;
+ }
+
+ pdev = platform_device_alloc("hardcode-ipmi-si", i);
+ if (!pdev) {
+ pr_err("Error allocating IPMI platform device %d\n", i);
+ return;
+ }
+
+ rv = platform_device_add_resources(pdev, r, num_r);
+ if (rv) {
+ dev_err(&pdev->dev,
+ "Unable to add hard-code resources: %d\n", rv);
+ goto err;
+ }
+
+ rv = platform_device_add_properties(pdev, p);
+ if (rv) {
+ dev_err(&pdev->dev,
+ "Unable to add hard-code properties: %d\n", rv);
+ goto err;
+ }
+
+ rv = platform_device_add(pdev);
+ if (rv) {
+ dev_err(&pdev->dev,
+ "Unable to add hard-code device: %d\n", rv);
+ goto err;
+ }
+
+ ipmi_hc_pdevs[i] = pdev;
+ return;
+
+err:
+ platform_device_put(pdev);
+}
+
+void __init ipmi_hardcode_init(void)
+{
+ unsigned int i;
char *str;
+ char *si_type[SI_MAX_PARMS];
/* Parse out the si_type string into its components. */
str = si_type_str;
@@ -95,54 +216,45 @@ int ipmi_si_hardcode_find_bmc(void)
}
}
- memset(&io, 0, sizeof(io));
for (i = 0; i < SI_MAX_PARMS; i++) {
- if (!ports[i] && !addrs[i])
- continue;
-
- io.addr_source = SI_HARDCODED;
- pr_info("probing via hardcoded address\n");
-
- if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
- io.si_type = SI_KCS;
- } else if (strcmp(si_type[i], "smic") == 0) {
- io.si_type = SI_SMIC;
- } else if (strcmp(si_type[i], "bt") == 0) {
- io.si_type = SI_BT;
- } else {
- pr_warn("Interface type specified for interface %d, was
invalid: %s\n",
- i, si_type[i]);
- continue;
- }
+ if (i < num_ports && ports[i])
+ ipmi_hardcode_init_one(si_type[i], i, ports[i],
+ IORESOURCE_IO);
+ if (i < num_addrs && addrs[i])
+ ipmi_hardcode_init_one(si_type[i], i, addrs[i],
+ IORESOURCE_MEM);
+ }
+}
- if (ports[i]) {
- /* An I/O port */
- io.addr_data = ports[i];
- io.addr_type = IPMI_IO_ADDR_SPACE;
- } else if (addrs[i]) {
- /* A memory port */
- io.addr_data = addrs[i];
- io.addr_type = IPMI_MEM_ADDR_SPACE;
- } else {
- pr_warn("Interface type specified for interface %d, but port
and address were not set or set to zero\n",
- i);
- continue;
- }
+void ipmi_si_hardcode_exit(void)
+{
+ unsigned int i;
- io.addr = NULL;
- io.regspacing = regspacings[i];
- if (!io.regspacing)
- io.regspacing = DEFAULT_REGSPACING;
- io.regsize = regsizes[i];
- if (!io.regsize)
- io.regsize = DEFAULT_REGSIZE;
- io.regshift = regshifts[i];
- io.irq = irqs[i];
- if (io.irq)
- io.irq_setup = ipmi_std_irq_setup;
- io.slave_addr = slave_addrs[i];
-
- ret = ipmi_si_add_smi(&io);
+ for (i = 0; i < SI_MAX_PARMS; i++) {
+ if (ipmi_hc_pdevs[i])
+ platform_device_unregister(ipmi_hc_pdevs[i]);
}
- return ret;
+}
+
+/*
+ * Returns true of the given address exists as a hardcoded address,
+ * false if not.
+ */
+int ipmi_si_hardcode_match(int addr_type, unsigned long addr)
+{
+ unsigned int i;
+
+ if (addr_type == IPMI_IO_ADDR_SPACE) {
+ for (i = 0; i < num_ports; i++) {
+ if (ports[i] == addr)
+ return 1;
+ }
+ } else {
+ for (i = 0; i < num_addrs; i++) {
+ if (addrs[i] == addr)
+ return 1;
+ }
+ }
+
+ return 0;
}
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index ae99d6a14789..abbd526626d5 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1865,6 +1865,18 @@ int ipmi_si_add_smi(struct si_sm_io *io)
int rv = 0;
struct smi_info *new_smi, *dup;
+ /*
+ * If the user gave us a hard-coded device at the same
+ * address, they presumably want us to use it and not what is
+ * in the firmware.
+ */
+ if (io->addr_source != SI_HARDCODED &&
+ ipmi_si_hardcode_match(io->addr_type, io->addr_data)) {
+ dev_info(io->dev,
+ "Hard-coded device at this address already exists");
+ return -ENODEV;
+ }
+
if (!io->io_setup) {
if (io->addr_type == IPMI_IO_ADDR_SPACE) {
io->io_setup = ipmi_si_port_setup;
@@ -2097,7 +2109,7 @@ static int try_smi_init(struct smi_info *new_smi)
return rv;
}
-static int init_ipmi_si(void)
+static int __init init_ipmi_si(void)
{
struct smi_info *e;
enum ipmi_addr_src type = SI_INVALID;
@@ -2105,11 +2117,9 @@ static int init_ipmi_si(void)
if (initialized)
return 0;
- pr_info("IPMI System Interface driver\n");
+ ipmi_hardcode_init();
- /* If the user gave us a device, they presumably want us to use it */
- if (!ipmi_si_hardcode_find_bmc())
- goto do_scan;
+ pr_info("IPMI System Interface driver\n");
ipmi_si_platform_init();
@@ -2121,7 +2131,6 @@ static int init_ipmi_si(void)
with multiple BMCs we assume that there will be several instances
of a given type so if we succeed in registering a type then also
try to register everything else of the same type */
-do_scan:
mutex_lock(&smi_infos_lock);
list_for_each_entry(e, &smi_infos, link) {
/* Try to register a device if it has an IRQ and we either
@@ -2307,6 +2316,8 @@ static void cleanup_ipmi_si(void)
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
cleanup_one_si(e);
mutex_unlock(&smi_infos_lock);
+
+ ipmi_si_hardcode_exit();
}
module_exit(cleanup_ipmi_si);
diff --git a/drivers/char/ipmi/ipmi_si_platform.c b/drivers/char/ipmi/ipmi_si_platform.c
index 15cf819f884f..f8f85416d47a 100644
--- a/drivers/char/ipmi/ipmi_si_platform.c
+++ b/drivers/char/ipmi/ipmi_si_platform.c
@@ -128,8 +128,6 @@ ipmi_get_info_from_resources(struct platform_device *pdev,
if (res_second->start > io->addr_data)
io->regspacing = res_second->start - io->addr_data;
}
- io->regsize = DEFAULT_REGSIZE;
- io->regshift = 0;
return res;
}
@@ -137,7 +135,7 @@ ipmi_get_info_from_resources(struct platform_device *pdev,
static int platform_ipmi_probe(struct platform_device *pdev)
{
struct si_sm_io io;
- u8 type, slave_addr, addr_source;
+ u8 type, slave_addr, addr_source, regsize, regshift;
int rv;
rv = device_property_read_u8(&pdev->dev, "addr-source", &addr_source);
@@ -149,7 +147,7 @@ static int platform_ipmi_probe(struct platform_device *pdev)
if (addr_source == SI_SMBIOS) {
if (!si_trydmi)
return -ENODEV;
- } else {
+ } else if (addr_source != SI_HARDCODED) {
if (!si_tryplatform)
return -ENODEV;
}
@@ -169,11 +167,23 @@ static int platform_ipmi_probe(struct platform_device
*pdev)
case SI_BT:
io.si_type = type;
break;
+ case SI_TYPE_INVALID: /* User disabled this in hardcode. */
+ return -ENODEV;
default:
dev_err(&pdev->dev, "ipmi-type property is invalid\n");
return -EINVAL;
}
+ io.regsize = DEFAULT_REGSIZE;
+ rv = device_property_read_u8(&pdev->dev, "reg-size", ®size);
+ if (!rv)
+ io.regsize = regsize;
+
+ io.regshift = 0;
+ rv = device_property_read_u8(&pdev->dev, "reg-shift", ®shift);
+ if (!rv)
+ io.regshift = regshift;
+
if (!ipmi_get_info_from_resources(pdev, &io))
return -EINVAL;
@@ -193,7 +203,8 @@ static int platform_ipmi_probe(struct platform_device *pdev)
io.dev = &pdev->dev;
- pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
+ pr_info("ipmi_si: %s: %s %#lx regsize %d spacing %d irq %d\n",
+ ipmi_addr_src_to_str(addr_source),
(io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
io.addr_data, io.regsize, io.regspacing, io.irq);
@@ -358,6 +369,9 @@ static int acpi_ipmi_probe(struct platform_device *pdev)
goto err_free;
}
+ io.regsize = DEFAULT_REGSIZE;
+ io.regshift = 0;
+
res = ipmi_get_info_from_resources(pdev, &io);
if (!res) {
rv = -EINVAL;
@@ -421,6 +435,7 @@ static int ipmi_remove(struct platform_device *pdev)
static const struct platform_device_id si_plat_ids[] = {
{ "dmi-ipmi-si", 0 },
+ { "hardcode-ipmi-si", 0 },
{ }
};
