On Tue, Dec 3, 2019 at 6:36 AM Andrew Jeffery <and...@aj.id.au> wrote:
>
> The v2 binding utilises reg and renames some of the v1 properties.
>
> Signed-off-by: Andrew Jeffery <and...@aj.id.au>
> ---
>  Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt | 20 +++++---
>  1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt 
> b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
> index d98a9bf45d6c..76b180ebbde4 100644
> --- a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
> +++ b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
> @@ -1,9 +1,10 @@
> -* Aspeed KCS (Keyboard Controller Style) IPMI interface
> +# Aspeed KCS (Keyboard Controller Style) IPMI interface
>
>  The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
>  (Baseboard Management Controllers) and the KCS interface can be
>  used to perform in-band IPMI communication with their host.
>
> +## v1
>  Required properties:
>  - compatible : should be one of
>      "aspeed,ast2400-kcs-bmc"
> @@ -12,14 +13,21 @@ Required properties:
>  - kcs_chan : The LPC channel number in the controller
>  - kcs_addr : The host CPU IO map address
>
> +## v2
> +Required properties:
> +- compatible : should be one of
> +    "aspeed,ast2400-kcs-bmc-v2"
> +    "aspeed,ast2500-kcs-bmc-v2"
> +- reg : The address and size of the IDR, ODR and STR registers
> +- interrupts : interrupt generated by the controller
> +- slave-reg : The host CPU IO map address

aspeed,slave-reg

>
>  Example:
>
> -    kcs3: kcs3@0 {
> -        compatible = "aspeed,ast2500-kcs-bmc";
> -        reg = <0x0 0x80>;
> +    kcs3: kcs@24 {
> +        compatible = "aspeed,ast2500-kcs-bmc-v2";
> +        reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;

What are the other registers in this address space? I'm not so sure
this is an improvement if you end up with a bunch of nodes with single
registers.

>          interrupts = <8>;
> -        kcs_chan = <3>;
> -        kcs_addr = <0xCA2>;
> +        slave-reg = <0xca2>;
>          status = "okay";
>      };
> --
> git-series 0.9.1


_______________________________________________
Openipmi-developer mailing list
Openipmi-developer@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openipmi-developer

Reply via email to