On 24/05/2021 17:06, Ryan Chen wrote:
-----Original Message-----
From: openbmc
<openbmc-bounces+ryan_chen=aspeedtech....@lists.ozlabs.org> On Behalf
Of Quan Nguyen
Sent: Wednesday, May 19, 2021 3:50 PM
To: Corey Minyard <miny...@acm.org>; Rob Herring <robh...@kernel.org>;
Joel Stanley <j...@jms.id.au>; Andrew Jeffery <and...@aj.id.au>; Brendan
Higgins <brendanhigg...@google.com>; Benjamin Herrenschmidt
<b...@kernel.crashing.org>; Wolfram Sang <w...@kernel.org>; Philipp Zabel
<p.za...@pengutronix.de>; openipmi-developer@lists.sourceforge.net;
devicet...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
linux-asp...@lists.ozlabs.org; linux-ker...@vger.kernel.org;
linux-...@vger.kernel.org
Cc: Open Source Submission <patc...@amperecomputing.com>; Thang Q .
Nguyen <th...@os.amperecomputing.com>; Phong Vo
<ph...@os.amperecomputing.com>; open...@lists.ozlabs.org
Subject: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Slave i2c device on AST2500 received a lot of slave irq while it is busy
processing the response. To handle this case, adds and exports
aspeed_set_slave_busy() for controller to temporary stop slave irq while slave
is handling the response, and re-enable them again when the response is ready.
Signed-off-by: Quan Nguyen <q...@os.amperecomputing.com>
---
v3:
+ First introduce in v3 [Quan]
drivers/i2c/busses/i2c-aspeed.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index b2e9c8f0ddf7..9926d04831a2 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -944,6 +944,26 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus
*bus,
return 0;
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy) {
+ struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+ unsigned long current_mask, flags;
+
+ spin_lock_irqsave(&bus->lock, flags);
+
+ current_mask = readl(bus->base + ASPEED_I2C_INTR_CTRL_REG);
Hello
Where the bus->base to be remap?
Hi Ryan,
In "[PATCH v3 6/7] ipmi: ssif_bmc: Add Aspeed SSIF BMC driver", the
->priv is retrieved by calling i2c_get_adapdata(client->adapter). And in
aspeed_set_ssif_bmc_status(), call the exported aspeed_set_slave_busy()
using ->priv pointer as code below.
+extern void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy);
+static void aspeed_set_ssif_bmc_status(struct ssif_bmc_ctx *ssif_bmc,
unsigned int status)
+{
+ if (status & SSIF_BMC_BUSY)
+ aspeed_set_slave_busy((struct i2c_adapter *)ssif_bmc->priv,
true);
+ else if (status & SSIF_BMC_READY)
+ aspeed_set_slave_busy((struct i2c_adapter *)ssif_bmc->priv,
false);
+}
+
+static int ssif_bmc_probe(struct i2c_client *client, const struct
i2c_device_id *id)
+{
+ struct ssif_bmc_ctx *ssif_bmc;
+
+ ssif_bmc = ssif_bmc_alloc(client, 0);
+ if (IS_ERR(ssif_bmc))
+ return PTR_ERR(ssif_bmc);
+
+ ssif_bmc->priv = i2c_get_adapdata(client->adapter);
+ ssif_bmc->set_ssif_bmc_status = aspeed_set_ssif_bmc_status;
+
+ return 0;
+}
- Quan
_______________________________________________
Openipmi-developer mailing list
Openipmi-developer@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openipmi-developer
