Removing voltage regulators max8952 from device tree. Those are fully
controlled by hardware and firmware should not touch them.
Reviewed-by: Eddie James <eaja...@linux.ibm.com>
Signed-off-by: Ninad Palsule <ni...@linux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 34 -------------------
1 file changed, 34 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 56357dda4b0a..7d9f6a1b2637 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -486,23 +486,6 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c1 {
@@ -1198,23 +1181,6 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c11 {
--
2.43.0
_______________________________________________
Openipmi-developer mailing list
Openipmi-developer@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openipmi-developer
