I'd go with the Graphics forest for OpenJFX:
$ hg clone http://hg.openjdk.java.net/openjfx/8/graphics myfx8
$ cd myfx8
$ hg clone http://hg.openjdk.java.net/openjfx/8/graphics/rt
$ cd rt
$ JAVA_HOME=<path-to-jdk8> JDK_HOME=<path-to-jdk8> gradle
This should build the OpenJFX for you. The <path-to-jdk8> should point
to a directory where you've just built your OpenJDK in (specifically,
the sdk (and not jre) image directory somewhere below the
myjdk8/build/<config>/ - you should run `make images` after the ordinary
`make` completes for your OpenJDK in order to generate the sdk image).
--
best regards,
Anthony
On 08/21/2013 01:31 PM, K, Dhevendran (MSDU) wrote:
Hi Anthony
Thanks Anthony for the detailed information. Can you also provide me the
corresponding JavaFX source
Note:- I was able to succeed the following steps
* hg clone _http://hg.openjdk.java.net/jdk8/awt myjdk8_ → done
* bash
./get_source.sh
→ In Progress
Please share the corresponding JavaFX source
Thanks in Advance
With Warm Regards
Dhevendran K
-----Original Message-----
From: Anthony Petrov [mailto:anthony.pet...@oracle.com]
Sent: Wednesday, August 21, 2013 1:00 PM
To: K, Dhevendran (MSDU)
Cc: Thomas, Binoy Samuel (MSDU); openjfx-dev@openjdk.java.net; Jolapara,
Vikram Dhirajlal (MSDU)
Subject: Re: OpenJFX 1.8 build issues
On 08/21/2013 10:36 AM, Anthony Petrov wrote:
Secondly, you're building the JDK in a somewhat strange way. It's much
easier than that. Just execute the following commands in your Cygwin
command prompt:
$ hg clonehttp://hg.openjdk.java.net/jdk8/awt myjdk8 $ cd myjdk8 $
bash ./get_source.sh $ cd ..
A small correction: you don't need this "cd ..". You want to stay in the
myjdk8 directory when running configure/make.
--
best regards,
Anthony
$ bash ./configure
$ make
And that's it. Provided you have all the necessary build tools
installed on your system, of course. In most cases you don't need to
specify any options for the configure script (other than 32 vs 64 bits
in case you want to build 32-bit JDK on a 64-bit box). You can find a
complete "how-to" document on building OpenJDK at:
http://hg.openjdk.java.net/jdk8/build/raw-file/tip/README-builds.html
Please let me know if you still have any issues.
--
best regards,
Anthony
On 08/21/2013 08:54 AM, K, Dhevendran (MSDU) wrote:
Hi Anthony
Thanks a lot for your answer.
I also compiled OpenJDK 1.8 source as part of this exercise
independently . I did the following to compile OpenJDK 1.8
1. Download OpenJDK 1.8 source and its dependent source
* OpenJDK 1.8 root-source from
_http://hg.openjdk.java.net/jdk8/jdk8_ àDone
* OpenJDK 1.8 Lang tools Source from
_http://hg.openjdk.java.net/jdk8/tl/langtools_ àDone
* Hotspot 1.8
Source
from_http://hg.openjdk.java.net/jdk8/jdk8/hotspot/rev/e437668ced9d_ àDone
* Corba 1.8 Source from_http://hg.openjdk.java.net/jdk8/jdk8/corba_
àDone
* Jaxp 1.8 Source from_http://hg.openjdk.java.net/jdk8/jdk8/jaxp_
àDone
* Jaxws 1.8 source from
_http://hg.openjdk.java.net/jdk8/jdk8/jaxws_
àDone
* JDK 1.8 source from _http://hg.openjdk.java.net/jdk8/jdk8/jdk_
àDone
2. JDK 1.8 Build environment is created after installing following on
top of *Step-2 *èBuild environment for JKD 1.8 compilation is not
ready yet as we are not able to find Hotspot the source
* */GnuWin32/* is installed
3. Building JDK
* */Execute the configure for all the all the add-on packages ( such
as Corba ,Hotspot … )/*
* ./configure
--with-override-langtools=../langtools/langtools-4300c2f5fb1b
--with-override-hotspot=../hotspot/hotspot-e437668ced9d
--with-override-corba=../corba/corba-d411c60a8c2f
--with-override-jaxp=../jaxp/jaxp-a22fe9bd01e6
--with-override-jaxws=../jaxws/jaxws-42211ab0ab1c
--with-override-jdk=../jdk/jdk-f1d8d15bfcb5 > err.txt 2>&1
* */Execute build /*àThis compilation fails with the following
error
* Make clean all
## Starting jdk
make[2]: *** No rule to make target
`/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/build/wi
ndows-x86_64-normal-server-release/corba/dist/lib/classes.jar',
needed by
`/cygdrive/c/dheva/JavaFX/software/OpenJDK/jdk8-ceefd94ef326/build/windows-x86_64-normal-server-release/jdk/classes/_the.CORBA.classes.imported'.
Stop.
make[1]: *** [import-only] Error 2
make: *** [jdk-only] Error 2
At this point, I have few questions
* I am not able to compile OpenJDK 1.8 without the “The optional
Packages” [i.e. Jaxws,Jaxp,Corba,Langtools and JDK ].
* In the attempt of compilation of these packages , Class not found
error is thrown pointing the respective source folders
*Is there any place where I can get more stable OpenJDK 1.8 **(with
JavaFX 1.8 ) ??* Awaiting for your response Thanks in Advance With
Warm Regards Dhevendran K -----Original Message-----
From: Anthony Petrov [mailto:anthony.pet...@oracle.com]
Sent: Tuesday, August 20, 2013 8:26 PM
To: K, Dhevendran (MSDU)
Cc:openjfx-dev@openjdk.java.net <mailto:openjfx-dev@openjdk.java.net>;
Thomas, Binoy Samuel (MSDU);
Jolapara, Vikram Dhirajlal (MSDU)
Subject: Re: OpenJFX 1.8 build issues Hi Dhevendran, This is a
mismatch of sources between JDK and FX. Try either cloning a fresh
copy of the FX repo (it's best to always clone both FX and JDK at the
same time, actually), or building with an older JDK build.
--
best regards,
Anthony
On 08/20/2013 06:26 PM, K, Dhevendran (MSDU) wrote:
Hi
I am facing some issue while building OpenJFX 1.8. The link
https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX is
followed to build on windows. The following steps are perfumed
1. Download the source from
:http://hg.openjdk.java.net/openjfx/8/graphics/rt --> Done
o The OpenJFX Code is change verify frequently at this site
2. Build environment for OpenJFX is created after doing the
following installation ( This is the as per the doc ) --> Done
o Cygwin is installed
o DirectX SDK June 2010 is installed
o Microsoft Visual Studio 10 is installed
o Gradle
v1.4<http://services.gradle.org/distributions/gradle-1.4-all.zip> is
installed
3. Building with Oracle JDK 1.8 binary distribution ==>
Build went through with some failure with the following message .
However, the jfxrt.jar is created !!
====================================================================
==
======================
:swing:compileJava
[ant:javac]
C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-3268003fe9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.java:496:
error: SwingNode.SwingNodeContent is not abstract and does not
override abstract method minimumSizeChanged(int,int) in
LightweightContent
[ant:javac] private class SwingNodeContent implements
LightweightContent {
[ant:javac] ^
[ant:javac] Note:
C:\dheva\JavaFX\software\OpenJavaFX_SRC\rt-3268003fe9c0\rt-3268003fe
9c0\modules\swing\src\main\java\javafx\embed\swing\SwingNode.java
uses or overrides a deprecated API.
[ant:javac] Note: Recompile with -Xlint:deprecation for details.
[ant:javac] 1 error
:swing:compileJava FAILED
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':swing:compileJava'.
Compile failed; see the compiler error output for details.
* Try:
Run with --stacktrace option to get the stack trace. Run with --info
or --debug option to get more log output.
BUILD FAILED
====================================================================
==
======================
Please let me know whether I am doing some fundamental mistake.
Please help me
Thanks in Advanve
With Warm Regards,
Dhevendran K
