Thanks for the response. However, I am not in control of the WMS maps supplied. I certainly cannot insist that the customer re-projects his entire WMS contents.
I am looking for a way to make the client (openLayers) adjust the projection (to its native spherical Mercator) prior to display? Incidentally, WorldWind has no problem displaying maps from the very same WMS and displaying a square OS grid. From: Richard Greenwood [mailto:richard.greenw...@gmail.com] Sent: 25 May 2013 16:03 To: Smart, Gary Cc: OpenLayers Subject: [External] Re: [OpenLayers-Users] EPSG:4326 WMS map aspect ratio I would suggest that you use an appropriate map projection for your area of interest. That's what projections are for. Ideally you project all your data and save it in that projection, although it is possible to reproject on the server, or on the client. Rich On Wed, May 22, 2013 at 7:59 AM, Smart, Gary <gary.sm...@utas.utc.com> wrote: I really would like to display the contents of my local WMS in a form which the users are used to (i.e. square OS grids, rather than the 'squashed' appearance which comes from mapping the EPSG:4326 onto a flat-Earth projection in high latitudes). I have found numerous examples of' how to resolve this problem', but none seem to have any effect on the distortion OR they result in no map being displayed at all. I cannot connect directly to map servers on the web (spherical Mercator), because my system is an isolated network and the maps are supplied by the customer. Salient extracts from the js code follow: var map, options = { projection: new OpenLayers.Projection('EPSG:4326'), //displayProjection: new OpenLayers.Projection('EPSG:3574'), //units: 'm', //maxResolution: 156543.0339, //maxExtent: new OpenLayers.Bounds(-20037508, -20037508, 20037508, 20037508) zoom: 14 }; map = new OpenLayers.Map('map', options); var my50kLayer = new OpenLayers.Layer.WMS( "OpenLayers WMS", "http://expdev2/cgi-bin/wms?";, { layers: 'UK_ASRP_1to50000', format: 'image/png', //transparent: 'true', continuousWorld: true, attribution: "OS 1:50K", }); map.addLayers([my50kLayer]); As the code exists above, the displayed map works fine (apart from the squished grid rectangles). Having adapted the 'measure example' from the OpenLayers examples page, I can measure from the map, and if the geodesic selection is made, the measurements are clearly correct (1Km across both dimensions of the OS grid). With geodesic selection not clicked, the measurement across the map is approximately 1.5Km. So the transforms and projections are clearly in sync. But how do I stretch the maps in the 'y' direction so they appear equant (not squished vertically)? Adding the displayProjection seems to do nothing. Using any of the other options with my WMS, results in a blank map. I have also plagiarised the polar-projections example from the OpenLayers example site, and replace the buttons with the following projections: var projectionOptions = { 'EPSG:4326': { projection: new OpenLayers.Projection('EPSG:4326') }, 'EPSG:3857': { projection: new OpenLayers.Projection('EPSG:3857'), maxExtent: new OpenLayers.Bounds(-5505054, -5505054, 5505054, 5505054), maxResolution: 5505054 / 128, numZoomLevels: 18 } }; // end projectionOptions array And I have applied the projections as per the example code (i.e. setProjection function was copied and is being called). However, pressing EPSG:3857 button results in a blank map, and pressing EPSG:4326 after that, also results in a blank map (albeit with a white pair of tiles in the middle)! Can anyone tell me whether it is possible to display a square grid for OS maps coming from an EPSG:4326 WMS? Thank you.
_______________________________________________ Users mailing list us...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/openlayers-users
