This totally depends on whether cn=config is replicated from the primary to the
read-only servers.
If cn=config is specific to each host you need to configure the monitoring
backend on each host.
But you could try this easily. Just configure the backend on the primary and
try to access cn=monitor on the replica.
Best,
Uwe
Am 21.11.23 um 15:27 schrieb Kevin Cousin:
Hi List,
I've got an LDAP architecture with one read-write OpenLDAP (primary) and some
read-only OpenLDAP (replica).
I load the cn=monitor backend on the primary? is it sufficient to have the cn=monitor backend on the slave too or should
I activate it on the replicas ?
Regards,
Kevin C
