I think so.
Check Amazon security group rules you assigned to the server. Remember
that OM uses many ports - not tcp:5080 only.
On 05/21/12 06:18, Maxim Solodovnik wrote:
AWS private/public IP is not an issue.
Please check you have all necessary ports opened and DB installed/running.
On Mon, May 21, 2012 at 10:10 AM, bmullan <[email protected]
<mailto:[email protected]>> wrote:
Sebastian
I am new to OpenMeetings but like Alexander I am trying install OM2
on Amazon's (AWS) EC2 cloud.
Like Alexander ... I can get everything installed but OpenMeetings
is NOT reachable from the internet.
You may not be familiar with AWS but when you launch a Server on AWS
EC2 it gets 2 IP addresses, and a PUBLIC DNS name.
There is a PUBLIC IP address that can connect to the server from the
internet.
However, there is also a PRIVATE IP address that is INTERNAL to the
AWS cloud and NOT reachable by the internet.
my example server:
/*Public DNS: ec2-23-23-198-151.compute-1.amazonaws.com
<http://ec2-23-23-198-151.compute-1.amazonaws.com>*/
/*Private DNS: ip-10-76-175-149.ec2.internal*/
/*Private IP Address: 10.76.175.149*/
Any application trying to reach my server across the internet would
point their URL to the PUBLIC DNS (which by the way the
23-23-198-151 is also the PUBLIC IP just substitute DOTS for the DASHS)
An application on the internet could NOT access the Private DNS
/ip-10-76-175-149.ec2.internal (or 10.76.175.14) as that is internal
to the AWS cloud only
*
*/However, ANY application _running ON that server_ which is set to
use either LOCALHOST -or- the PUBLIC DNS -or- the PUBLIC IP ... will
automatically be redirected by the AWS Cloud virtualzation itself to
the PRIVATE INTERNAL IP Address.... which is NOT reachable by the
Internet./*
*
For example _if I am logged into that openmeetings server_ and I
ping its PUBLIC DNS ec2-23-23-198-151.compute-1.amazonaws.com... I
will really be pinging 10.76.175.149 ... the internal private IP.
Therefore my OpenMeeting server (and I assume xander's) is NOT
reachable from the internet the way OpenMeetings is configured and I
get this screen when attempting to access it. It stays at this
message forever. Yes, I have checked mysql password, userID and
host and they are all correct.
/*http://23.23.198.151:5080/openmeetings/install*
/
/
/OpenMeetings - Loading .../
/The server is not yet completely initialized. Please try again in a
couple of seconds./
/If this message persists for several minutes contact your
Sys-Administration./
/If that message stays forever you should check the logs located in /
/openmeetings_install_dir/log/
folder, probably your database user/pwd/host is wrong!
I have also tried changing "hostname" in these files:/*
*/
* /*/etc/init.d/red5*/
*
/*/usr/lib/red5/webapps/openmeetings/WEB-INF/classes/META-INF/persistence.xml*/
* /*and in the mysql openmeetings database */
to the PUBLIC IP address of the AWS server and restarted everything
and I still end up with the above message... waiting forever.
So although I can reach something on the AWS Openmeetings server...
there is something in the application configuration that is not
communicating correctly in the AWS cloud environment.
/*
*/Any ideas or other configuration items I should be checking?
Brian Mullan/*
*/
On Saturday, July 2, 2011 3:40:38 AM UTC-4, Sebastian Wagner wrote:
Hi Alexander,
the installation on EC2 is not really different from installing
OpenMeetings on any other dedicated server.
You can simply use the normal Installation Instructions.
The Automatic Install Script is also not that up-to-date with the
latest version of OpenMeetings.
But why this line of the script:
Done!! open the website at your browser: http://$(ifconfig eth0
|grep
"inet addr:" |cut -d : -f 2 |cut -f1 -d"
"):5080/openmeetings/install
Does not return your IP ... I mean you know what IP / domain you
got,
why not simply enter that address?
Sebastian
2011/7/1 Xander Dumaine <[email protected]
<mailto:[email protected]>>:
> I created an instance on Amazon EC2 server running Debian
5.0. I used
> the automated script install found here:
>
http://code.google.com/p/__openmeetings/wiki/Automatic___script_installation_for_Debian
<http://code.google.com/p/openmeetings/wiki/Automatic_script_installation_for_Debian>
>
> the installation says it was successfull, but I am unable to
use the
> url it provided to me at the end of install, and also unable
to use
> the dynamic url provided by amazon. Can anyone help me to
figure out
> how to resolve this issue? If it is a setting I need to
change, can
> you help me with that? Thanks,
> Xander
>
> --
> You received this message because you are subscribed to the
Google Groups "OpenMeetings User" group.
> To post to this group, send email to
openmeetings-user@__googlegroups.com
<mailto:[email protected]>.
> To unsubscribe from this group, send email to
openmeetings-user+unsubscribe@__googlegroups.com
<mailto:openmeetings-user%[email protected]>.
> For more options, visit this group at
http://groups.google.com/__group/openmeetings-user?hl=en
<http://groups.google.com/group/openmeetings-user?hl=en>.
>
>
--
Sebastian Wagner
http://www.webbase-design.de
http://openmeetings.__googlecode.com
<http://openmeetings.googlecode.com>
http://www.wagner-sebastian.__com <http://www.wagner-sebastian.com>
[email protected] <mailto:[email protected]>
On Saturday, July 2, 2011 3:40:38 AM UTC-4, Sebastian Wagner wrote:
Hi Alexander,
the installation on EC2 is not really different from installing
OpenMeetings on any other dedicated server.
You can simply use the normal Installation Instructions.
The Automatic Install Script is also not that up-to-date with the
latest version of OpenMeetings.
But why this line of the script:
Done!! open the website at your browser: http://$(ifconfig eth0
|grep
"inet addr:" |cut -d : -f 2 |cut -f1 -d"
"):5080/openmeetings/install
Does not return your IP ... I mean you know what IP / domain you
got,
why not simply enter that address?
Sebastian
2011/7/1 Xander Dumaine <[email protected]
<mailto:[email protected]>>:
> I created an instance on Amazon EC2 server running Debian
5.0. I used
> the automated script install found here:
>
http://code.google.com/p/__openmeetings/wiki/Automatic___script_installation_for_Debian
<http://code.google.com/p/openmeetings/wiki/Automatic_script_installation_for_Debian>
>
> the installation says it was successfull, but I am unable to
use the
> url it provided to me at the end of install, and also unable
to use
> the dynamic url provided by amazon. Can anyone help me to
figure out
> how to resolve this issue? If it is a setting I need to
change, can
> you help me with that? Thanks,
> Xander
>
> --
> You received this message because you are subscribed to the
Google Groups "OpenMeetings User" group.
> To post to this group, send email to
openmeetings-user@__googlegroups.com
<mailto:[email protected]>.
> To unsubscribe from this group, send email to
openmeetings-user+unsubscribe@__googlegroups.com
<mailto:openmeetings-user%[email protected]>.
> For more options, visit this group at
http://groups.google.com/__group/openmeetings-user?hl=en
<http://groups.google.com/group/openmeetings-user?hl=en>.
>
>
--
Sebastian Wagner
http://www.webbase-design.de
http://openmeetings.__googlecode.com
<http://openmeetings.googlecode.com>
http://www.wagner-sebastian.__com <http://www.wagner-sebastian.com>
[email protected] <mailto:[email protected]>
--
WBR
Maxim aka solomax
