Sebastian, is RTMPT still not working for you on demo.openmeetings.de? maybe you can try set packet size to 128K for it?
On Wed, Jun 6, 2012 at 5:08 PM, [email protected] <[email protected] > wrote: > Hi George, > > the process is like that: > First (try 0) rtmp > try1 rtmpt > try2 rtmpt > try3 rtmpt > > So first it will try rtmp and then 3 times rtmpt. > Things are different if you configure rtmps. > > Currently RTMPT does not work at all with altest builds as there is an > issue with the underlaying Red5 server and RTMPT. > > Changing RTMPT to port 443 (if RTMPT is working again) should be best for > Firewall issues. Packets on port 443 are normally not blocked by firewalls > as 443 is normally HTTPS. > > Sebastian > > > 2012/6/5 George Kirkham <[email protected]> > >> Hi,**** >> >> ** ** >> >> We conference with people who are behind a firewall which blocks many >> ports, including 1935. Previously I had OpenMeetings working for them by >> using “rtmpt.port=8080” instead of the default port “rtmpt.port=8088”, >> and while this worked previously it has been failing for some time now.** >> ** >> >> ** ** >> >> **1) **I think there is a fault in OpenMeetings in using the >> secondary ports, as I have been testing with my own installation by >> disabling port 1935 in our firewall and then doing an external test (which >> fails). I have tested this on the standard installation settings and with >> my modified 8080 port, both fail on Try 1 (because I use the firewall to >> block port 1935), Try 2 and Try 3. >> >> **** >> >> **2) **Can someone please explain to me how the port process >> works. My understanding is that if OpenMeetings cannot connect via “ >> rtmp.port=1935” for “try 1”, then it tries again on “rtmpt.port=8088” >> for try 2. I do not know what it attempts to use on try 3 (which is also >> failing for me). I believe that it is not trying the alternative ports >> >> **** >> >> **3) **Can someone please test for me, by blocking port 1935 in >> your firewall and see if external users can connect to your OpenMeetings? >> >> **** >> >> **4) **What is the repercussions if I were to change “rtmp.port=1935” >> to “rtmp.port=8080” ? Does this affect performance in any way? >> >> **** >> >> **5) **The attached image is message I get after the three tries to >> connect all fail, when I block port 1935.**** >> >> ** ** >> >> **** >> >> ** ** >> >> Thanks,**** >> >> ** ** >> >> George Kirkham**** >> >> ** ** >> >> ** ** >> > > > > -- > Sebastian Wagner > https://twitter.com/#!/dead_lock > http://www.openmeetings.de > http://www.webbase-design.de > http://www.wagner-sebastian.com > [email protected] > -- WBR Maxim aka solomax
<<image003.png>>
