Hi Marc, I don't have any problem of running your model in my own computer. I've both tried the model in the OMNotebook as well as OMShell. I even tried to increase the array dimension from 30 to 100 with the same result.
Since the error message is pointing to the OpenModelicaHome environment variable where have you installed it? On Windows the installation path should not contain any space and preferably you should install it directly under C:\ Please re-install OpenModelica. Best Regards Mohsen Torabzadeh-Tari From: [email protected] [mailto:[email protected]] On Behalf Of Dierckx Marc Sent: den 11 augusti 2010 16:43 To: openmodelicainterest Subject: Larger arrays Hello, I seem to have problems with larger arrays. The following model won't run in OMshell. It gives the error: Error building simulator. Buildlog: command g++ not found. Check $OPENMODELICAHOME ... model md1 Real T[30](start=ones(30)*200); Real Tin=100; Real temp[30](start=zeros(30)); equation temp[1]=100.0; temp[2:30]=T[2:30]; der(T)=temp; end md1; The strange thing is that arrays up to a length of 20 seem to work just fine ... as soon as the array increases above 20 I get this error. Flattening of the model seems not to be any problem ... the problem is in the compilation of the code ... please help ! Kind regards, Marc Dierckx SCK*CEN SCK?CEN Disclaimer: www.sckcen.be/en/Legal-aspects/E-mail-disclaimer
