Ok, I found the problem. I was writing the wrong file. zImage, not uImage. Does anybody know the status of the GSM. Does it work out of the box, in the latest repo builds, should I do something to make it work?
Thanks, emre On 8/9/07, Emre Turkay <[EMAIL PROTECTED]> wrote: > Hi folks, > > I've compiled the openmoko images with MokoMakefile. Written them to > the device via dfu-util. However, when I turn it on, the device is > showing the openmoko splash screen and waiting there. So I switched to > the boot screen and selected "boot" option from there and it turned > off just after writing the following message to the screen: > > NAND read: device 0 offset 0x44000, size 0x200000 > 2097152 bytes read: OK > ## Booting image at 32000000 ... > > Bad magic number > Press [AUX] to power off > > I thought there is something wrong with the kernel image so I > re-written it. No good, the same result. I'm writing the > > moko/build/tmp/deploy/images/zImage-2.6.21.6-moko11-r1_0_0_2388_0-fic-gta01.bin > > file to the "kernel" alt setting by entering the command: > > sudo ./dfu-util -d 0x1457:0x5119 -a kernel -R -D > zImage-2.6.21.6-moko11-r1_0_0_2388_0-fic-gta01.bin > > Does anybody have any idea on what I'm doing wrong? > > Thanks, > > emre >
