Hi all, Yesterday evening I finally had time to check my FreeRunner? and its Debug Board.
First of all I opened the Freerunner and made all the requested connection between the openmoko and the debug board (the cable and the USB connector), next I connected the debug board to my PC. Reading http://wiki.openmoko.org/wiki/Debug_board I see that my USB ID 0403:6010 request I need to reflash the debug board. So I started my tries with linux. Downloaded libftdi -> applied patch from http://people.openmoko.org/werner/libftdi-c56-strings-dirty-hack.patch Hunk 1 failed ... done manual patching Hunk 2 Succeed with Fuzz 1 Rechecked ftdi.c, it seems ok. Compiled and installed OK Downloaded ftdi_eeprom -> applied patch from http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/ftdi_eeprom-0.2-moko.patch Succeed Downloaded - http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/neo1973_debug_board_v2.ftdi - http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/neo1973_debug_board_v2.eeprom Now let's try to patch # ftdi_eeprom --flash-eeprom ftdi_eeprom/neo1973_debug_board_v2.ftdi Error: No device with vendor id 1457:5118 Ok let's see tried to substitute vendor id and product id inside the .ftdi, but Cannot Flash Let's try with Windows Downloaded MProg3.0 Downloaded http://people.openmoko.org/laforge/misc/debug_board_v2/mprog_template/neo1973_debugboard_v2.ept Started MProg3.0 Applied "Scan for Available Devices" Results: Number Of Blank Devices = 0 Number Of Programmed Devices = 0 Simply I see the device connected, but I'm unable to apply the correct firmware. I wrote this also to the http://docs.openmoko.org/trac/ticket/1567. does anyone is in my same situation ? thanks a lot -- Alessandro Sappia [EMAIL PROTECTED]