On Sat, Mar 24, 2007 at 03:22:43AM +0100, Stefan Schmidt wrote: > Hello. > > This patch adds support for the QVGA fullscreen capabilities of the > LCM. > > * Add proper register init. > > * Add a fourth state (normal-qvga)to the state machine.
there's some whitespace / coding style problem with the sleep_to_normal_qvga() function, please fix this > The second patch enabled the support with a hack. Switching through > the SysFS state file does not work. It only reports me deep-standy all > the time. Harald, had this worked for you in the past? Yes, this has worked quite fine in the past. Also, the suspend/resume code path uses the state transitions... > The biggest remeining problem is the that is does not work together > correctly with the framebuffer driver. Setting it to 240x320 and use > the timings from the data sheet did not work. > > Set the register via JTAG gives us better, but still not complete > correct, picture. But set this values for the framebuffer does not > give us the same results. mh. if JTAG register setting gives better results, then it seems like the mode switching code in s3c2410fb might have problems.. -- - Harald Welte <[EMAIL PROTECTED]> http://openmoko.org/ ============================================================================ Software for the world's first truly open Free Software mobile phone
