On 29/10/2007, Javi Roman <[EMAIL PROTECTED]> wrote: > GSM TS07.10 multiplex missing: > http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=90
I'm recently trying to implement the multiplexing, it's progressing very slowly due to the modem stopping responding in unexplained ways, but I hope I will find out why. I noticed that Qtopia doesn't do multiplexing on the Neo1973 even though it supports GSM TS07.10 in general - to me this is a hint that something is wrong with the hardware or the serial driver. > > make sure PMU alarm (set via rtc interface) is persistent > http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=96 > > s3c2410fb 8bit mode corrupt: > http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=194 > > jffs2 fork error message during kernel bootup: > http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=463 > > 8 seconds power button timeout no longer working (regression): > http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=889 I think this is not necesarily a kernel bug. If the reporter says that the init script is nto shutting down after receiving the signals then it's the scripts issue. If the kernel is locked up and the 8 seconds timeout is not working then that would be an u-boot issue I think (or whoever initialises the PMU watchdog - the kernel driver?) Regards
