Hi Willie, Wolfgang, Wolfgang gave me a list of potential GTA01-only bugs to classify and prioritize. Here are my comments:
P#82 implement and test cpufreq interface to S3C2410 PLL / SLOWCLK Yes, GTA01-specific. Not urgent. P#149 lm4857 not i2c address compliant Yes, GTA01-specific (GTA02 uses a different chip, without I2C). Should be done when merging the driver upstream. P#872 Implement GPS and BT power in neod power button menu The BT power control should be the same in GTA02 (please check). Not really low-level. P#194 s3c2410fb 8bit mode corrupt Yes, GTA02-specific. This should probably be combined with the QVGA work. P#695 Hold button on headset does not report events This should be the same, or at least very similar, in GTA02 as well (please check). If this doesn't work yet in GTA02, this would be a design verifcation issue. P#806 Standby voltage set to 2.1V, not 1.8V as datasheet says. Yes, GTA01-specific. This one definitely wants looking into. P#900 Power cycles on and off while charging GTA01-specific. May be hard to reproduce and narrow down. So for this list, I'd say the priorities are: GTA02: P#695, P#872 GTA01: P#806, try to reproduce P#900, P#194, P#149, P#82 - Werner
