Hi Willie, On Thu, Jan 24, 2008 at 03:17:30AM +0800, Willie Chen wrote: > > >That's coming from the ar6k driver. Do you have a wireless module on this > >board ? > > > >Cheers, > >Samuel. > > > > > Hi Samuel, > > I test wireless module on GTA02A5 and log messages as following. > > [ 55.045000] Current Request Command:5, ARG:0x00100000 flags: 0x0008 > [ 55.060000] CRCFAIL 0x1a3f > [ 55.060000] CRCFAIL 0x1a3f > [ 55.060000] Current Request Command:5, ARG:0x00100000 flags: 0x0008 > [ 55.225000] sdio_wlan 00:01: driver attached > [ 55.230000] sdio_wlan 00:01: SDIO device, IDs SD_0001 (active) > [ 56.295000] Unsupported configuration opcode: 3 > [ 56.300000] Unsupported configuration opcode: 5 > [ 56.305000] ar6000_available > [ 56.315000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) > [ 56.320000] Block Size Set: 128 (target address:0x8000066C) > [ 56.325000] ar6000_init() Got WMI @ 0xc7d9d200. > [ 56.360000] SDIO_INT_CTRL enable IRQ > [ 56.370000] mac address = 00:12:cf:4a:c2:4a > [ 56.375000] AR6000 Reg Code = 0x40000060 > [ 56.385000] ar6000_init() WMI is ready > [ 56.425000] ar6000_avail: name=eth0 htcTarget=0xc7f94000, > dev=0xc7fa0000 (0), ar=0xc7fa04a0 Excellent, that looks much better. Please note that you seem to be using a 2.0.0.89 FW, while the official FW we got from Atheros is a 2.0.0.40 one. I assume the 2.0.0.89 got there through Accton, but please make sure A5s are not produced with this wifi FW.
Cheers, Samuel. > [ 58.305000] JFFS2 notice: (293) check_node_data: wrong data CRC in data > node at 0x08d3b65c: read 0x79b050ea, calculated 0xe55c033b. > [ 61.205000] VFS: Mounted root (jffs2 filesystem). > > Regards, > Willie
