Dear All: After some discussion, I modified some on power mode. This file is my suggestion for power mode. I add a talking mode and I turn off these sub modules which GSM doesn't need.
Hi Matt: In last mail, for GSM leakage voltages, I just use a u-boot to test it. Can you release a new GPIO setting image (U-boot, Kernel...) in suspend for measuring current? Best Wishes~ ______________________________________________ Allen Chang ( 張 吉 隆 ) First International Computer Inc. 7F, No.300, Yang Guang St., NeiHu, Taipei, 114, Taiwan Tel: +886-2-8751-8751 Ext: 6171 Fax: +886-2-8751-8739 Email:[EMAIL PROTECTED] -----Original Message----- From: ALLEN_CHANG (張吉隆) Sent: Monday, February 04, 2008 5:12 PM To: 'Andy Green'; matt_hsu Cc: [email protected]; TIM_LEE (李國平經理); TONY_TU [塗能宇專案經理]; Werner Almesberger Subject: RE: Suspended mode Dear all: After my search, I found out GSM leakage voltage problem. We can't just set the GPH0-3( TX_MODEM,RX_MODEM,CTS_MODEM,RTS_MODEM) to input and I try to set these GPIO to output low. The VBAT( GSM power) is almost zero. Therefore, I suggest a new GPIO configure in the attached file. The file is just for testing S32C2442's part current and not for any power mode. Best Wishes~ ______________________________________________ Allen Chang ( 張 吉 隆 ) First International Computer Inc. 7F, No.300, Yang Guang St., NeiHu, Taipei, 114, Taiwan Tel: +886-2-8751-8751 Ext: 6171 Fax: +886-2-8751-8739 Email:[EMAIL PROTECTED]
Visio-basic mode.pdf
Description: Visio-basic mode.pdf
