yeah, Driver -> USB -> Gadget -> Ethernet Gadget Drive is already enabled. In fact, I could able to use Ethernet over USB. FYI, I am using 2.6.22.5 kernel patched with the usb_mode_swith.patch I cross verified whether the patch is applied correctly using the tool "nm", it listed both show_usb_mode and set_usb_mode on the ohci_hcd.ko.
Thanks n Regards, Phani Kumar On Fri, Mar 7, 2008 at 5:51 PM, Felipe Balbi <[EMAIL PROTECTED]> wrote: > > > On Fri, 7 Mar 2008 17:30:44 +0530, "Phani Kumar Kancharala" > <[EMAIL PROTECTED]> wrote: > > Thanks Felipe, > > The module ohci-hcd is loaded but use count is zero. > > what do you mean by gadget driver? where can I get it?? > > make menuconfig > Driver -> USB -> Gadget -> Ethernet Gadget Driver ;-) > > enable that one ;-) > > BTW, HCDs will always have usecount 0, this is done so you can > rmmod/modprobe easier. > good for debugging :-p > > > > > Best Regards, > > Phani Kumar > > On Fri, Mar 7, 2008 at 4:59 PM, Felipe Balbi <[EMAIL PROTECTED]> wrote: > > > >> > >> > >> On Fri, 7 Mar 2008 15:35:10 +0530, "Phani Kumar Kancharala" > >> <[EMAIL PROTECTED]> wrote: > >> > Hi all, > >> > I am trying to run the usb in host mode. I created a new kernel image > >> > after > >> > applying the patch given in the wiki. > >> > Now the problem is, I couldn't see the file "usb_mode" under > >> > /sys/devices/platform/s3c2410-ohci/. > >> > > >> > should we create this file or it will be there on loading the module > >> > ohci_hcd?? > >> > >> You need to load the module. > >> You may need a gadget driver as well for switching roles between host > > and > >> peripheral > >> > >> > > >> > Thanks n Regards > >> > Phani Kumar > >> -- > >> Best Regards, > >> > >> Felipe Balbi > >> http://felipebalbi.com > >> [EMAIL PROTECTED] > >> > >> > -- > Best Regards, > > Felipe Balbi > http://felipebalbi.com > [EMAIL PROTECTED] > >
