Currently only GPB0, GPB1, GPB2 are used for the LEDs, the addition of GPB3 is
purely for the symmetry with the above code.
From 29eb3c9624353427829990956e2136804727df5e Mon Sep 17 00:00:00 2001
From: Holger Freyther <[EMAIL PROTECTED]>
Date: Wed, 9 Apr 2008 15:11:58 +0200
Subject: [PATCH] [leds] We would enable PWM for all four timers, disable it
for all four as well
Currently we do not use the PWM code to drive the LEDS. We have enabled the
PWM
for four timer sources but disable it only for three, fix that up.
Signed-Off-By: Holger Freyther <[EMAIL PROTECTED]>
---
drivers/leds/leds-neo1973-gta02.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/leds/leds-neo1973-gta02.c
b/drivers/leds/leds-neo1973-gta02.c
index 8678670..fbb62c4 100644
--- a/drivers/leds/leds-neo1973-gta02.c
+++ b/drivers/leds/leds-neo1973-gta02.c
@@ -161,6 +161,7 @@ static int __init gta02led_probe(struct platform_device
*pdev)
case S3C2410_GPB0:
case S3C2410_GPB1:
case S3C2410_GPB2:
+ case S3C2410_GPB3:
lp->has_pwm = 0;
s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(lp->gpio, 0);
--
1.5.3
