[PATCH 3/7] quench-glamofb-err-lock-and-mmc-debug.patch

[Andy Green]

Remove debugging noise

Signed-off-by: Andy Green <[EMAIL PROTECTED]>
---

 drivers/mfd/glamo/glamo-fb.c  |    3 ---
 drivers/mfd/glamo/glamo-mci.c |    4 ++--
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c
index edc6d9c..e5410f9 100644
--- a/drivers/mfd/glamo/glamo-fb.c
+++ b/drivers/mfd/glamo/glamo-fb.c
@@ -319,7 +319,6 @@ static void glamofb_update_lcd_controller(struct 
glamofb_handle *glamo,
        if (!glamo || !var)
                return;
 
-       printk(KERN_ERR"glamofb_update_lcd_controller spin_lock_irqsave\n");
        spin_lock_irqsave(&glamo->lock_cmd, flags);
 
        if (glamofb_cmd_mode(glamo, 1))
@@ -430,7 +429,6 @@ static void glamofb_update_lcd_controller(struct 
glamofb_handle *glamo,
 
 /*     GLAMO_LOG("leave:\n"); */
 out_unlock:
-       printk(KERN_ERR"glamofb_update_lcd_controller 
spin_unlock_irqrestore\n");
        spin_unlock_irqrestore(&glamo->lock_cmd, flags);
 }
 
@@ -786,7 +784,6 @@ static int __init glamofb_probe(struct platform_device 
*pdev)
        glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
        glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
 
-       printk(KERN_ERR"spin_lock_init\n");
        spin_lock_init(&glamofb->lock_cmd);
        glamofb_init_regs(glamofb);
 
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
index 05bbfc4..7869325 100644
--- a/drivers/mfd/glamo/glamo-mci.c
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -195,7 +195,7 @@ static void glamo_mci_irq(unsigned int irq, struct irq_desc 
*desc)
                      GLAMO_STAT1_MMC_BRERR))
                cmd->error = -EILSEQ;
        if (cmd->error) {
-               dev_err(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+               dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
                goto done;
        }
 
@@ -467,7 +467,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
                return;
 
        if (cmd->error) {
-               dev_err(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+               dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
                goto done;
        }
        /*