Hi. On Sun, 2008-05-11 at 12:12 +0100, Andy Green wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Somebody in the thread at some point said: > > | Note: moving to "origin/stable" which isn't a local branch > | If you want to create a new branch from this checkout, you may do so > | (now or later) by using -b with the checkout command again. Example: > | git checkout -b <new_branch_name> > | HEAD is now at 4ec6097... nand_skip_bad.patch > | > | Is that okay? I'm not a git guru :) > > If you plan to make edits, you don't want to use an origin/* branch for > anything. This is used to keep a clean copy of what the repo you got it > from has in it. > > If you don't plan to make edits, it's fine. > > Otherwise make a branch for your work based off origin/stable, you can > use the advice in the warning, eg, > > git checkout -b nigel > > will get you a copy you can meddle with while leaving origin/stable clean.
Okee doke. I'm used to making new branches locally, but not to dealing with pulling from remote branches in this way (I've never seen the above message before). > |> make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- gta02v6_config > |> make ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- u-boot.udfu > | > | I've installed the x86_64 toolchain, and get at this point: > | > | [...] > | make[1]: Nothing to be done for `u-boot.lds'. > | make[1]: Leaving directory > `/home/nigel/Programming/openmoko/u-boot/board/neo1973/gta02' > | UNDEF_SYM=`arm-angstrom-linux-gnueabi-objdump -x > lib_generic/libgeneric.a board/neo1973/gta02/libgta02.a > cpu/arm920t/libarm920t.a cpu/arm920t/s3c24x0/libs3c24x0.a > lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a > fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a > net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a > drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a > drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a > drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a > drivers/mtd/nand_legacy/libnand_legacy.a > drivers/mtd/onenand/libonenand.a drivers/net/libnet.a > drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a > drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a > drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a > post/libpost.a post/drivers/libpostdrivers.a common/libcommon.a > libfdt/libfdt.a api/libapi.a |sed -n -e > 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort| > | uniq`;\ > | cd /home/nigel/Programming/openmoko/u-boot && > arm-angstrom-linux-gnueabi-ld > - -L/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/lib > - -Wl,-rpath-link,/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/lib > - -Wl,-O1 -Bstatic -T > /home/nigel/Programming/openmoko/u-boot/board/neo1973/gta02/u-boot.lds > - --defsym raise=hang -Ttext 0x33F80000 $UNDEF_SYM cpu/arm920t/start.o \ > | --start-group lib_generic/libgeneric.a > board/neo1973/gta02/libgta02.a cpu/arm920t/libarm920t.a > cpu/arm920t/s3c24x0/libs3c24x0.a lib_arm/libarm.a fs/cramfs/libcramfs.a > fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a > fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a > disk/libdisk.a drivers/bios_emulator/libatibiosemu.a > drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a > drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a > drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a > drivers/mtd/nand_legacy/libnand_legacy.a > drivers/mtd/onenand/libonenand.a drivers/net/libnet.a > drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a > drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a > drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a > post/libpost.a post/drivers/libpostdrivers.a common/libcommon.a > libfdt/libfdt.a api/libapi.a --end-group -L > /usr/local/openmoko/arm/lib/gcc/arm-angstrom-linux-gnueabi/4.1.2 -l > | gcc \ > | -Map u-boot.map -o u-boot > | arm-angstrom-linux-gnueabi-ld: unrecognized option > '-Wl,-rpath-link,/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/lib' > | arm-angstrom-linux-gnueabi-ld: use the --help option for usage information > | make: *** [u-boot] Error 1 > > Dunno, sorry. Okay. Hopefully someone else will. Thanks! Nigel
