-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said:
| x = -72, y = -990, t = 1.976891 pi | | It's quite reasonable. However, | | * sometimes after booting | * always after resume (apm -s) | | the result will look like this: | | x = 1620, y = -36, t = 0.492928 pi Do you notice any explosion at this time and you fly through the air horizontally :?) I don't know what it is, there is a setting on the thing to reduce sensitivity to increase dynamic range that would change output, but it would change it down, not to 1620. 1620 is raw count of 90... can you check to see if the output is still responsive to movement correctly, ie, perhaps the issue is one about the baseline offset is wrong after powerup and we need to explicitly reset the thing (it fetches them from internal EEPROM when reset). I would suspect the raw data is shifted somehow but it doesn't seem likely the way we bitbang it address-first. - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkhbfDUACgkQOjLpvpq7dMqeugCeJDd8DitJgRStcXV/BMn4jZt+ lFUAn19pBINYegKOCSefPTX8sb/85jBO =APu5 -----END PGP SIGNATURE-----
