-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said: | These patches basically complete Qi for GTA02. Qi will first try to init | the SD Card and mount an ext2 filesystem on the first partition; if that
If anyone is curious about trying this on GTA02, I put an image here: http://people.openmoko.org/andy/qi.udfu If you are confident about DFU and using NOR / AUX DFU, you can DFU this 21KByte image into the U-Boot partition and it will "replace" NAND U-Boot. You can always put normal U-Boot image back in there by NOR boot DFU if you like. Booting on the NAND path is pretty quick, Glamo SD is a bit slower. The two boot paths look like this: Qi Bootloader pads.home.warmcat.com andy_ccdcadb5e1d22b35 Fri Aug 22 00:06:11 BST 2008 Copyright (C) 2008 Openmoko, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ~ Detected: Freerunner / GTA02, A5 PCB Trying kernel: SD Card EXT2 Kernel ~ Card Type: SD 2.0 / Mfr: 0x03, OEM "SD" / SU512", rev 8.0 / s/n: 281091459 / date: 8/2007 ~ MMC/SD size: 511 MiB ~ Partition: 1 start +237 512-byte blocks, size 483 MiB ~ EXT2 open: boot/uImage.bin ~ Found: "Openmoko Freerunner Kernel" ~ Size: 1787 KiB ~ Cmdline: mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(cmdline),0x00800000(backupkernel),0x000a0000(extra),0x00040000(identity),0x0f6a0000(backuprootfs) rootfstype=ext2 root=/dev/mmcblk0p1 console=ttySAC2,115200 loglevel=4 init=/sbin/init ro Starting ---> Uncompressing Linux....................................................................................................................... done, booting the kernel. ... Qi Bootloader pads.home.warmcat.com andy_ccdcadb5e1d22b35 Fri Aug 22 00:06:11 BST 2008 Copyright (C) 2008 Openmoko, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ~ Detected: Freerunner / GTA02, A5 PCB Trying kernel: SD Card EXT2 Kernel no response block device init failed Trying kernel: NAND Kernel ~ RAW open: +1024 512-byte blocks ~ Found: "Openmoko Freerunner Kernel" ~ Size: 1850 KiB ~ Cmdline: mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(cmdline),0x00800000(backupkernel),0x000a0000(extra),0x00040000(identity),0x0f6a0000(backuprootfs) rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 loglevel=8 init=/sbin/init ro Starting ---> Uncompressing Linux........................................................................................................................... done, booting the kernel. ... - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkit+mkACgkQOjLpvpq7dMolnwCeOflKyfGhCmz+Cv5AffFGdCnD 64cAnimpCyzFKBWiL1cYQ32/FvYI949E =v76/ -----END PGP SIGNATURE-----
