-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said: | This large patch removes motion sensor from Linux SPI bitbang driver. | Previously, some access was done through Linux SPI protected | by a mutex, and the ISR access was done by platform bitbang code due | to inability of Linux SPI driver to work in the interrupt context. | | Now all access is done by bitbang callbacks in mach_gta02.c and are | protected by single scheme of interrupt lockout for the duration -- | I line-by-line'd the driver to confirm that best I could, adding | protection and taking more care on several /sys related paths. | | Because this is no longer a Linux SPI bus driver, the path for various | /sys things have changed. They can now be found down, eg, | | /sys/devices/platform/lis302dl.1/sample_rate | | lis302dl.1 is the top sensor and .2 the bottom. The names of the input | susbsytem paths remain the same as before.
I tested this for some minutes in two ssh sessions hexdumping the same and both channels, it seems OK. But because of the change in /sys path, ~ it feels better to get some confirmation it improves the situation before putting people though that change on stable, so I stuck it on andy branch right now and would appreciate some testing... it should apply pretty well to 2.6.26 too. - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAki0hnkACgkQOjLpvpq7dMqYNQCcCDeXcvXMm9vkKR3bt9O5Urz1 J5AAn1SFgEnwOu9kjbGbWex0657XJKaD =b5aO -----END PGP SIGNATURE-----
