This should fix the reported problems with audio when the
kernel is started with Qi on GTA02
Signed-off-by: Andy Green <[EMAIL PROTECTED]>
---
src/cpu/s3c2442/gta02.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/src/cpu/s3c2442/gta02.c b/src/cpu/s3c2442/gta02.c
index 885debd..dbeb852 100644
--- a/src/cpu/s3c2442/gta02.c
+++ b/src/cpu/s3c2442/gta02.c
@@ -53,6 +53,9 @@ const struct pcf50633_init pcf50633_init[] = {
{ PCF50633_REG_HCLDOOUT, 21 }, /* 3.0V (21 * 0.1V + 0.9V) */
{ PCF50633_REG_HCLDOENA, 0x01 }, /* ON by default*/
+ { PCF50633_REG_DOWN1OUT, 0x1b }, /* 1.3V (0x1b * .025V + 0.625V)
*/
+ { PCF50633_REG_DOWN1ENA, 0x02 }, /* enabled if GPIO1 = HIGH */
+
{ PCF50633_REG_INT1M, 0x00 },
{ PCF50633_REG_INT2M, 0x00 },
{ PCF50633_REG_INT3M, 0x00 },
@@ -62,12 +65,17 @@ const struct pcf50633_init pcf50633_init[] = {
{ PCF50633_REG_MBCC2, 0x28 }, /* Vbatconid=2.7V, Vmax=4.20V */
{ PCF50633_REG_MBCC3, 0x19 }, /* 25/255 == 98mA pre-charge */
{ PCF50633_REG_MBCC4, 0xff }, /* 255/255 == 1A adapter fast */
- { PCF50633_REG_MBCC5, 0x19 }, /* 25/255 == 98mA soft-start
usb fast */
+ { PCF50633_REG_MBCC5, 0xff }, /* 255/255 == 1A usb fast */
{ PCF50633_REG_MBCC6, 0x00 }, /* cutoff current 1/32 * Ichg */
{ PCF50633_REG_MBCC7, 0x00 }, /* 1.6A max bat curr, USB 100mA
*/
{ PCF50633_REG_MBCC8, 0x00 },
{ PCF50633_REG_MBCC1, 0xff }, /* chgena */
+ { PCF50633_REG_LDO1ENA, 2 }, /* enabled if GPIO1 = H */
+ { PCF50633_REG_LDO2ENA, 2 }, /* enabled if GPIO1 = H */
+ { PCF50633_REG_LDO5ENA, 1 },
+ { PCF50633_REG_LDO6ENA, 1 },
+
{ PCF50633_REG_BBCCTL, 0x19 }, /* 3V, 200uA, on */
{ PCF50633_REG_OOCSHDWN, 0x04 }, /* defeat 8s death from lowsys
on A5 */
