I love you man ! I really love you ! lol
It works exactly how you said. Thank you very much. I'm gonna ad it to the wiki Thanks again, you saved my phone ! On Wed, Nov 26, 2008 at 6:32 PM, Stefan Schmidt <[EMAIL PROTECTED]> wrote: > Hello. > > On Wed, 2008-11-26 at 17:57, Cédric DUFOUIL wrote: >> >> After loadinf FLUID everything were fine ... I started again the >> module by typing 's3c24xx-gpio b7=1' as said in the wiki, and it >> started to flash the firmware. While it was flashing (I could see the >> progress ...) It failed by a 'Flash operation timeout'error >> >> Now, the GSM module seems to not respond anymore :'( > > I had the same problem. Please try the following: > > Use the following fluid commandline > [EMAIL PROTECTED]:/usr/sbin# FLUID_PORT=/dev/ttySAC0 fluid.exe -oO -b 115200 > -f $HOME/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0 > > (Without FLOWCONTROL and with -oo to choose the ROM bootloader) > > Then on the second session plese use this instead of the gpio command: > echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on > echo 1 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on > > Download should start now. > > Let me know if it worked for you. > > regards > Stefan Schmidt > >
