Michael Trimarchi wrote:
Hire wrote:
Michael Trimarchi wrote:
Hi all,
Version based on the last andy-tracking + some modification.
To boot the new kernel you must change the u-boot enviroment variable
because the image is quite big. You can do that using the usb console.
I remove in bootargs the tty0 console but I compile it in the kernel.
I don't have flickering
contains:
- uImage-v4.bin openmoko freerunner gta02 image
- filesystem-v4.jffs2 android support
Support:
- wifi
- bluetooth
- gsm call (new binary library from Sean McNeil)
- suspend better performance
- fix a panic if you press aux button during suspend
Regards Michael
Your site is down :(
Hi know, I find a regression on the uImage and I put the old one :)
The name is uImage-v4.bin but
It is the test version of yesterday. Remain the resume improvement
on android framework.
The problem was:
- the power button if it is pressed for one more seconds it sends a
sleep message, so the system rise
and the sleep :D (I think). Now If you press for more the one second
go HOME.
Michael
/data/misc/wifi/wpa_supplicant.conf maybe is wrong :(
ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=1010
update_config=1
