[PATCH 8/9] s3c2410: NAND ECC by chip rather than global

[Nelson Castillo]

This makes us take note about the chosen ECC mode per-chip and
  not the one set globally.

Signed-off-by: Andy Green <a...@openmoko.com>
---

 drivers/mtd/nand/s3c2410.c |   34 +++++++++++++++++++++++++---------
 1 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f841b07..0024f10 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -774,6 +774,21 @@ static void s3c2410_nand_init_chip(struct 
s3c2410_nand_info *info,
 
        if (set->disable_ecc)
                chip->ecc.mode  = NAND_ECC_NONE;
+
+       switch (chip->ecc.mode) {
+       case NAND_ECC_NONE:
+               dev_info(info->device, "NAND ECC disabled\n");
+               break;
+       case NAND_ECC_SOFT:
+               dev_info(info->device, "NAND soft ECC\n");
+               break;
+       case NAND_ECC_HW:
+               dev_info(info->device, "NAND hardware ECC\n");
+               break;
+       default:
+               dev_info(info->device, "NAND ECC UNKNOWN\n");
+               break;
+       }
 }
 
 /* s3c2410_nand_update_chip
@@ -790,18 +805,19 @@ static void s3c2410_nand_update_chip(struct 
s3c2410_nand_info *info,
        dev_dbg(info->device, "chip %p => page shift %d\n",
                chip, chip->page_shift);
 
-       if (hardware_ecc) {
+       if (chip->ecc.mode != NAND_ECC_HW)
+               return;
+
                /* change the behaviour depending on wether we are using
                 * the large or small page nand device */
 
-               if (chip->page_shift > 10) {
-                       chip->ecc.size      = 256;
-                       chip->ecc.bytes     = 3;
-               } else {
-                       chip->ecc.size      = 512;
-                       chip->ecc.bytes     = 3;
-                       chip->ecc.layout    = &nand_hw_eccoob;
-               }
+       if (chip->page_shift > 10) {
+               chip->ecc.size      = 256;
+               chip->ecc.bytes     = 3;
+       } else {
+               chip->ecc.size      = 512;
+               chip->ecc.bytes     = 3;
+               chip->ecc.layout    = &nand_hw_eccoob;
        }
 }