Afternoon All, I have two questions that I am struggling to find an answer to and I was wondering if anyone has tried to do either of these.
Firstly, I wanted to set up hub redundancy, as to have a single (or multiple) end-points maintain constant communication to more than one hub, is this as simple as entering two sets of mappings within the conf and attaching it to the same interface? (see below). Is this possible? interface gre1 map 192.168.1,1/24 public-ip.fake.com register cisco cisco-authentication 1234 shortcut redirect multicast nhs holding-time 600 interface gre1 map 192.168.1.2/24 another-ip.fake.com register cisco cisco-authentication 1234 shortcut redirect multicast nhs holding-time 600 I am going to be trying this this afternoon, but if anyone has had any experience in hub redundancy then confirmation of this would be appreciated. Secondly, I wanted another dmvpn network to only go to phase 2 (ie; not spoke-to-spoke), is it possible to restrict opennhrp in this fashion? Thank you for your help. Best Regards, Chris. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ opennhrp-devel mailing list opennhrp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/opennhrp-devel
