On Tue, Nov 8, 2011 at 11:04 PM, Akos Vandra <[email protected]> wrote: > I added a few LOG_DEBUGs to check out what's going on, it seems that > when ahbap_debugport_init() is called jtag_interface->transport is > nil.
I have crafted Stm32Primer2 with full SWD/JTAG pinout and all pins available. It is possible to do so but: 1. Flash must be erased prior crafting so JTAG/SWD, so pins are not used as IO (they are IO in default firmware). 2. No need to cut off the wires - RLink can be pulled into reset state (6-pin testpoints contain nRST and GND) so all it outputs are Hi-Z and they does not disturb CPU operations :-) The JTAG bug is confirmed, transport is NULL, dont know why, Ill take a look at it, thanks for reporting :-) Best regards :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
