Nvm I think I figured it out, it is just the debug base address was wrong. I had two boards which I thought was the exact same, but turns out they are not. So when I went from one board to the other it starts to fail.
-----Original Message----- From: CeDeROM [mailto:[email protected]] Sent: Monday, November 14, 2011 1:30 PM To: James Zhao Cc: [email protected] Subject: Re: [OpenOCD-devel] CoreSight compatibility On Mon, Nov 14, 2011 at 7:38 PM, James Zhao <[email protected]> wrote: > Thanks for the tips, but the delay and power does not seem to be > causing the STICKERR. Hello James :-) Quick greping the sources showed where to look for answers: target/arm_adi_v5.c: * CoreSight(tm) v1.0 Architecture Specification ARM IHI 0029B target/arm_adi_v5.h:/* Lookup CoreSight component */ target/etm.c: * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2, Sorry I am not familiar with this component yet so thats all I can help for now ;-P Also it seems that MEM-AP has some error flags checking in JTAG part of the code. What device are you working with? :-) Best regards, Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ----------------------------------------------------------------------------------- ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
