Do you use a gdb start script? Look like your code is not uploaded and you try to debug the "old" application.
On 11.01.2012 11:19, Sergio wrote: > Hi list, >>From las six months I'm trying to work with eclipse+cdt+openocd to > debug a application. Googling, I can make some results but I don't > know how continue. Please, help. > I'm using openocd (try with devel version from hit repo and with las > stable, the result is the same), debuging with gdb 7.2 (no patch), cdt > + eclipse helios and I'm using "GDB hardware debuging" options to make > the debug. > The program is loaded in the target, openocd work, but I have this > errors in the console when try to run te application: > > Open On-Chip Debugger 0.5.0 (2012-01-10-08:11) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > Warn : Adapter driver 'parport' did not declare which transports it > allows; assuming legacy JTAG-only > Info : only one transport option; autoselect 'jtag' > parport port = 0x0 > 500 kHz > Info : clock speed 500 kHz > Info : JTAG tap: lm3s2776.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > Info : lm3s2776.cpu: hardware has 6 breakpoints, 4 watchpoints > 500 kHz > cortex_m3 reset_config sysresetreq > Info : JTAG tap: lm3s2776.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x00000904 msp: 0x20006054 > Info : accepting 'gdb' connection from 3333 > Warn : acknowledgment received, but no packet pending > Info : dropped 'gdb' connection > Info : accepting 'gdb' connection from 3333 > Warn : acknowledgment received, but no packet pending > 500 kHz > cortex_m3 reset_config sysresetreq > Info : JTAG tap: lm3s2776.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x00000904 msp: 0x20006054 > background polling: on > TAP: lm3s2776.cpu (enabled) > target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x00000904 msp: 0x20006054 > ------------- Problems begin > ------------------------------------------------ > Error: address + size wrapped(0xfffffffe, 0x00000004) > Error: JTAG-DP STICKY ERROR > Error: MEM_AP_CSW 0x23000050, MEM_AP_TAR 0xab184abc > ------------- End problems > ----------------------------------------------------- > Info : Padding image section 0 with 4 bytes > Info : Padding image section 1 with 808 bytes > ------------- Problems begin > ------------------------------------------------ > Error: address + size wrapped(0xfffffffe, 0x00000004) > Error: JTAG-DP STICKY ERROR > Error: MEM_AP_CSW 0x23000050, MEM_AP_TAR 0xab184abc > ------------- End problems > ----------------------------------------------------- > > The more rare is:I can use break's, step, and more. But sometime, when > trace or run and pause the are no sinchronization betwen the show code > and the run code. It is the code running is not the code show in the > editor.... I don't know > Please, if someone are using eclipse+cdt+openocd with stellaris (lm3s) helme. > More info, I'm using parallel por wigler2 in linux with my own build of gcc. > The debuger options in eclipse/cdt at startup are: > > target remote localhost:3333 > monitor reset halt > monitor poll > set remote hardware-breakpoint-limit 6 > set remote hardware-watchpoint-limit 4 > > and at the run command: > break ResetISR > break main > continue > > All Runtime checkboxes are uncheced, load image and load symbols are checked. > > Thank's > > Sergio ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
