The default one. On 09.03.2012 19:51, [email protected] wrote: > Thank you for your reply. > I noticed that the CPU has also > EJTAG_CE0 and EJTAG_CE1 pins. > These pins are used to select between JTAG and > EJTAG functions. > > There 3 working modes > > 1. > Normal EJTAG operation - default > > 2. > Internal test only > > 3. > JTAG boundary scan > > > Which one should I use? > Thanks > > > >> > I read about that and now I have a device that >> > reports all zeros >> > like this >> >> Try to add external pull-up resistors (10K ohms) up to VCC on ALL of the >> JTAG pins. >> >> Stian Skjelstad >> > > > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel
------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
